ACRONIS BACKUP AND RECOVERY 10 ONLINE STAND-ALONE User Manual page 9

The following are instructions about how to package your hard disk drive.
Step 1
Delicately remove your hard disk drive from the machine.
Step 2
Place the hard drive into an anti-static bag to protect the drive from electrostatic discharge. If you do
not have an anti-static bag, simply wrap the hard drive into aluminum foil.
Step 3
Use a sturdy box that is at least twice the size of the drive. Pack the drive with a bubble wrap around
all 6 sides so it can fit tight into the box and cannot be moved within.
DO NOT use Styrofoam peanuts for packing as they do not provide enough protection.
DO NOT send your media in jiffy bags
9 Copyright © Acronis, Inc., 2000-2010