Related Manuals for Thermo 3308
Summarization of Contents
Warranty Information
Before Requesting Warranty Service
Key information and procedures to follow before contacting for warranty service.
Repairs Not Covered Under Warranty
Details specific repairs and conditions excluded from warranty coverage.
Section 1 - Installation and Start-up
Incubator Components and Systems Overview
Identification of main parts, inventory system, and control panel elements.
Operating the Incubator Interface
Guide to using the keypad, understanding displays, and basic operation.
Physical Installation Procedures
Instructions for unit placement, leveling, stacking, and connections.
Section 2 - Incubator Settings
Initial Setup and Setpoint Configuration
Steps for starting up and setting temperature, CO2, and RH parameters.
Section 3 - Calibration
Calibration Mode and Sensor Calibration
Accessing calibration mode and calibrating temperature, CO2, and RH sensors.
Section 4 - Configuration
Configurable Incubator Features
Overview of features adjustable via the configuration menu.
Alarm and Filter Reminder Settings
Configuring audible alarms, HEPA filter reminders, and access codes.
Section 5 - Alarms
Alarm System Overview and Descriptions
Details on alarm messages, delays, relay functions, and system status.
Specific Alarm Conditions and Troubleshooting
Troubleshooting for temperature, RH, sensor, and door alarms.
Section 6 - Troubleshooting
Performance and Condensation Troubleshooting
Resolving issues with temperature, CO2, RH recovery, and condensation.
Section 7 - Routine Maintenance
Interior Cleaning and Humidity System Care
Instructions for cleaning the incubator interior, doors, and humidity system.
Exterior Cleaning and HEPA Filter Maintenance
Procedures for cleaning the exterior and replacing HEPA filters.
Section 8 - Sterilization Cycle
Sterilization Cycle Preparation and Information
Key details and precautions before initiating the sterilization cycle.
Sterilization Cycle Execution and Checkpoints
Step-by-step process and checkpoints for the sterilization cycle.
Preventive Maintenance Summary
Maintenance Guidelines and Tips
General advice and precautions for maintaining the incubator's performance.
Preventive Maintenance Schedule
A schedule detailing daily, weekly, monthly, and yearly maintenance actions.
Section 9 - Factory Options
External Equipment Connections
Connecting remote alarms, RS485, and analog output boards.
CO2 Gas Guard System Operation
Details on the CO2 Gas Guard system, its operation, and connections.
Section 10 - Specifications
Temperature and Humidity Specifications
Technical details for temperature and humidity control, range, and uniformity.
CO2, Shelving, and Sterilization Specifications
Technical details for CO2 control, shelving, and sterilization cycle parameters.
Section 11 - Servicing
Parts List and Fuse Replacement
List of available parts and instructions for replacing incubator fuses.
Filter and Component Replacement
Procedures for replacing CO2/RH filters and general servicing.
Need help?
Do you have a question about the 3308 and is the answer not in the manual?
Questions and answers