Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Mackie THUMP 215
Summarization of Contents
Thump Series Loudspeakers: Rear Panel Features
Power Connection
Details the standard 3-prong IEC power connector and its proper use.
Power Switch
Explains how to use the rocker switch to turn the loudspeaker on and off.
XLR and 1/4" Combo Input Jacks
Describes the balanced mic and line-level inputs, wiring standards, and plug types.
1/8" Input Jack (Channel 2)
Details the 1/8" line-level input for phones/MP3 players and its use with Channel 2.
Mic / Line Switch (Channel 1)
Explains how to set the sensitivity for mic or instrument signals on Channel 1.
Gain Knobs (Channels 1 & 2)
Guides on setting gain levels for optimal sound and performance.
Thru Jack
Describes the male XLR output for daisy-chaining loudspeakers.
Main Volume Knob
Explains how the volume knob adjusts the overall signal level to the power amplifiers.
Sig/OL LED
Details the dual-colored LED indicating signal presence and limiter activation.
Music Ducking
Explains the feature that reduces Channel 2 level when Channel 1 receives a mic signal.
Feedback Eliminator
Describes the automatic feedback hunts and notch filters for Channel 1.
Fan On/Off
Instructions on how to turn the internal fan on and off for cooling.
Fan Speed
Details how to select fan speed settings from 1 (lowest) to 5 (highest).
Mist Level
Explains the mist function and its LED indicator for cooling.
Heat On/Off
Instructions on how to turn the internal heater on and off for cold environments.
Heat Level
Details how to select heat level settings from 1 (low) to 5 (high).
Rotate
Explains how to set rotation speed for the fan/heater (1-3).
Need help?
Do you have a question about the THUMP 215 and is the answer not in the manual?
Questions and answers