Statistic Counter Structure - Dell PowerVault TL2000 Reference Manual

Page Length:
The Page Length specifies the total number of bytes contained in this log page, not including the
four bytes of the header.

Statistic Counter structure

Bit 7
Byte
0 (MSB)
1
2 DU(0)
3
4 (MSB)
5
6
7
Field descriptions:
Parameter Code :
The Parameter Code is a 2-byte value that uniquely identifies the parameter within the log. It
ranges from 1..9.
DU: Disable Update is set for any parameter that the Host cannot reset.
DS: Disable Save. The media changer has no support for SP bit. Set to 1.
TSD: Target shall determine save method, set to 0.
ETC: No threshold comparison, set to 0.
TMC: No threshold supported, set to 0.
LP: The List Parameter field is set to zero for parameters that are counters and set to one for
parameters that are not counters.
Parameter Definition
1 Minutes of Operation:
2 Number of Power-ups:
3 Number of Firmware
Updates:
4 Number of Loader
Moves:
5 Number of Event
Entries:
6 Number of Error
Entries:
7 Number of
Informational Entries
3-18
TL2000 and TL4000 SCSI Reference
6 5
Parameter Code (n)
DS(1) TSD(0) ETC(0)
Parameter Length (4)
Statistic Counter Value
Description
This 4 byte unsigned counter specifies the minutes of
operation. Every minute the device is turned on this
counter will increment.
This 4 byte unsigned counter specifies the number of
times the library is turned on.
This 4 byte unsigned counter specifies the number of
times the internal flash code (ROM) has been updated.
This 4 byte unsigned counter specifies the number of
times the media changer performed a successful Move
operation.
This 4 byte unsigned counter specifies the number of
Event entries in the trace buffer.
This 4 byte unsigned counter specifies the number of
Error entries in the trace buffer.
This 4 byte unsigned counter specifies the number of
Informational entries in the trace buffer.
4 3
TMC(0) Reserved
2 1
Reserved LP(0)
DU LP
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0
(LSB)
(LSB)