Dell PowerVault TL2000 Configuration Manual page 10

Dell PowerVault™ TL4000/TL2000 Failover Guide
Single SAS Drive Failover Configuration
(one host with two HBAs, and One SAS drive)
Main Path
Failover Reference Configuration 7:
One host with two Fibre Channel HBAs, one Fibre Channel switch and one Dell PowerVault™
with a Single Fibre Channel drive
In this configuration, failover occurs only if one of the HBAs fails. This configuration only supports data
path failover as there is no second drive to failover the control path. The physical connection of this
configuration is shown in Figure 7.
10 | P a g e
Always refer to www.dell.com\support for latest documentation and updates
Failover Path
Figure 6: Reference Configuration 6
1 2 / 3 1 / 0 9 v e r s i o n 2 . 0