Related Manuals for Kverneland TIGER 700
Summarization of Contents
Introduction to Kverneland Seedbed Cultivators
Intended Use of the Seedbed Cultivator
Explains the purpose and recommended seedbed profile of the cultivator.
Technical Specifications Overview
Details specifications for different TIGER models, features, and optional equipment.
Machine Type Plate Information
Shows the location and purpose of the machine's identification plate.
Safety Guidelines for Operation
Hazard Warnings and Symbols
Lists various hazard symbols and their meanings, focusing on crushing, impact, falling, and hydraulic hazards.
Operator Safety Instructions
Provides crucial operating instructions and safety checks before driving on public roads.
Safe Transport on Public Roads
Details procedures and precautions for transporting the cultivator on public roads.
Setting Up the Seedbed Cultivator
Raising and Lowering the Draw Bar
Explains how to raise and lower the draw bar for storage purposes.
Hitching and Hydraulic Connections
Details the process of hitching the cultivator and connecting hydraulic hoses.
Balancing Hydraulic Circuits
Describes how to balance hydraulic circuits for proper operation.
Horizontal Adjustment Procedure
Explains how to adjust the cultivator's horizontal straightness using the top link.
Middle and Wing Section Adjustment
Details how to align the middle section with the wing sections using cylinder adjustments.
Working Depth Adjustment
Explains how to control and measure working depth using hydraulic valves and indicators.
Working Depth Indicator Setup
Describes the function and adjustment of the working depth indicator.
Using the Frontboard for Leveling
Explains how to adjust and use the frontboard for leveling.
Setting Up Rear Equipment
Details adjustment and use of rear equipment like following harrows and spiral rollers.
Troubleshooting and FAQ for Setup
Provides solutions for common hydraulic control and adjustment problems.
Harrowing Operations
General Harrowing Principles
Explains the purpose of S-tine cultivators and general operating considerations.
Driving Lines and Turning Techniques
Describes driving patterns for headland turns to protect tines.
Maintenance and Servicing
Key Maintenance Values
Lists critical tyre pressures and tightening torques for various components.
Routine Maintenance Instructions
Outlines maintenance checks and tasks required after the first day, weekly, and after the season.
Winter Storage Procedures
Provides guidance on cleaning, lubricating, and protecting the cultivator during winter storage.
Lubrication Points Guide
Visually indicates lubrication points on the cultivator with different frequencies.
Tine Maintenance and Replacement
Explains how to replace a broken tine and tine points, including torque specifications.
Bogie Beam Bearing Maintenance
Details how to check and tighten the bogie beam bearing.
Wheel Hub Bearing Maintenance
Describes how to check bearing clearance and lubricate wheel hubs.
Change Valve Maintenance
Explains the function and adjustment of the change valve control rod.
Valve Disassembly Guide
Provides steps for disassembling a valve, emphasizing marking procedures.
Warranty Information
Terms and Conditions of Warranty
Outlines the terms, conditions, and exclusions of the manufacturer's warranty.
EC Declaration of Conformity
Official EC Declaration of Conformity
Confirms that Kverneland Tiger seedbed cultivators meet EU machine directive requirements.
Need help?
Do you have a question about the TIGER 700 and is the answer not in the manual?
Questions and answers