Related Manuals for Kverneland TIGER 600
Summarization of Contents
Introduction to Kverneland Seedbed Cultivators
Intended Use of Seedbed Cultivator
Explains the purpose of the seedbed cultivator for preparing soil after primary tillage.
Technical Specifications of Tiger Cultivators
Details the specifications like working width, number of tines, draught requirement, and wheel size for different models.
Understanding the Type Plate
Describes the location and purpose of the machine's identification type plate.
Safety Guidelines for Operation
General Safety Warnings and Symbols
Details various hazards like crushing, cutting, falling, and hydraulic pressure with associated warning symbols.
Safe Transport on Public Roads
Provides instructions for safely raising wing sections, closing valves, checking tires, and driving on public roads.
Setting Up and Adjusting the Seedbed Cultivator
Draw Bar Adjustment and Storage
Details on how to raise and lower the draw bar for storage and transport.
Hitching and Hydraulic Connections
Instructions for connecting the cultivator to the tractor and its hydraulic system.
Seedbed Cultivator Adjustment Procedures
Covers horizontal adjustment, section alignment, depth control, frontboard, and rear equipment setup.
Troubleshooting Setup and Adjustment Issues
Common problems and solutions for hydraulic controls and depth adjustments during setup.
Harrowing Operations
General Harrowing Principles
Discusses working depth, frame stress during turns, obstacles, and initial passes on hard soil.
Driving Lines and Turning Strategies
Explains how to manage turns to avoid stress on tines and ensure proper soil coverage.
Maintenance and Servicing
Key Maintenance Values and Instructions
Lists tyre pressures, torque values, and daily/weekly/seasonal maintenance tasks.
Lubrication Points and Procedures
Illustrates specific lubrication points and their required frequency (daily, weekly, seasonal).
Tine Replacement and Repair
Instructions on how to replace broken tines and tine points, including torque specifications.
Bogie Beam Bearing Maintenance
Guidance on checking and tightening bogie beam bearings for proper function.
Wheel Hub Bearing Service
Procedures for checking, tightening, and lubricating wheel hub bearings.
Hydraulic System Maintenance
Covers hydraulic diagrams, valve operation, and disassembly for maintenance.
Warranty Information
Terms and Conditions of Warranty
Outlines the manufacturer's warranty period, coverage, exclusions, and owner responsibilities.
EC Declaration of Conformity
Conformity to Machine Directives and Standards
Declares that the machines meet relevant EU machine directives and harmonized standards.
Need help?
Do you have a question about the TIGER 600 and is the answer not in the manual?
Questions and answers