Advertisement
Quick Links
Advertisement
Related Manuals for xMount Bike
Summarization of Contents
xMount Car & Home Installation
Mounting and Initial Check
Instructions for removing from packaging, fastening to a system, and checking for correct click.
Suction Connector Use and Surface Prep
Use the suction connector on a clean, grease-free surface, cleaned every 24 hours.
Adjusting and Tightening Screws
Adjust inclination angle, tower base, and tighten screws before usage.
xMount Car for Headrest Installation
Headrest Mounting Procedure
Fasten xMount Car to headrests of driver or passenger seats using enclosed screws.
Holder Assembly and Stability
Loosen screws, remove cover, insert rod, fasten with cover, ensure stability, and bend gooseneck.
xMount Air Installation
Ventilation Console Attachment
Fasten for ventilation at center console lamella, click clamps, and ensure security.
Holder Stabilization and Adjustments
Adjust hinge for stabilization, angle, and 360-degree tower base.
Pre-Use Screw Tightening
Ensure adjusting screws are tightened before usage.
xMount Tube/Bike Installation
Tube Fastening and Pad Placement
Loosen screws, place rubber pads for thickness on tube to prevent slipping.
iPad Orientation and Securing
Determine iPad orientation, fasten, and secure half shells using lateral screws.
xMount Wall Installation
Wall Fastening and Marking
Fasten using enclosed material, mark drilling locations with a pencil.
Drilling and Screw Installation
Drill holes for stone walls, fasten with wall plugs and screws.
Angle and Base Adjustments
Use interior screw for inclination angle and 360-degree tower base.
xMount Boat Installation
Adapter and Suction Cup Attachment
Fasten adapter, hook suction cup, and lock retaining nut.
Angle and Base Adjustments
Adjust inclination angle and tower base using screws.
Pre-Use Screw Tightening
Ensure adjusting screws are tightened before usage.
xMount Safety and General Information
General Safety and Usage Guidelines
Observe safety instructions, use only as intended, check solar irradiation effects.
Driving and Surface Requirements
Do not use while driving, ensure clear view, use on smooth surfaces, adhere to speed limits.
Cleaning and Repair Procedures
Clean with appropriate solutions, repairs by professionals only.
Child Safety and Handling
Keep away from children, be aware of small parts and choking hazards.
Transport and Storage Precautions
Protect against shocks, dirt, sun, humidity, and electrostatic charge.
xMount Safety and Operation Details
External Power Supply Guidelines
Use only specified accumulators and adapters, avoid heat sources.
Positioning and Operation Safety
Mount to avoid injury, do not impede driver, do not operate while driving.
Anti-Theft System Information
Use specified locks for anti-theft protection.
Liability Disclaimer
No liability for damages from misuse or non-observance of safety instructions.
Need help?
Do you have a question about the Bike and is the answer not in the manual?
Questions and answers