Download Print this page

xMount Desk Secure Operating Instructions

Table of Contents

Download this manual

Holds your iPad!

Table of Contents

Need help?

Do you have a question about the Desk Secure and is the answer not in the manual?

Page 1 Holds your iPad!
Page 2 Remove xMount Desk Secure from the packaging. xMount Desk Secure has been delivered to you in pre-assembled condition. Drill a hole on the mounting surface for cable lead-through. Now screw xMount Desk Secure tightly using wooden screws. Now remove part 1 and push the iPad into the mount with the home button downwards.
Page 3 Remove the holder with parts 2 and 3 now. • Now exchange part 2 for part 4 and reassemble the parts in the sequence xMount Basis part 2 part • In this process, please pay attention to the optimal choice of the screws. Screw M 4x20 screws in the treads top right and bottom left, M 4x10 screws top left and bottom right.
Page 4 A strong solar irradiation may affect the function of the product. For additional technical data and general information please refer to the product on our homepage www.xmount.de General information The product must not be used during driving. When fastening the product in the vehicle please ensure the field of view not being restricted and comply with the StvZO (Road Traffic Licensing Regulations) here.
Page 5 Anti-theft system The xMount anti-theft system is construed for simple theft (removal). It cannot withstand theft attempts by tools and brute force. For the anti-theft protection, please exclusively use locks of the brand Burgwächter C-Line 220-20 with a diameter of 11 mm in order to avoid the mount sliding on.