A Appendix-Manual Configuration Of Iscsi - Dell PowerVault MD3600i Deployment Manual

Appendix—Manual Configuration
of iSCSI
The following sections contain step-by-step instructions for configuring
iSCSI on your storage array. However, before beginning, it is important to
understand where each of these steps occur in relation to your host server or
the storage array environment.
Table A-1 shows each iSCSI configuration step and where it occurs.
Table A-1. Host Server Vs. Storage Array
This Step is Performed on the Host Server
Using the Microsoft or Linux iSCSI Initiator
Perform target discovery from the iSCSI
3
initiator.
(Optional) Configure CHAP
6
authentication on the host server.
Connect to the storage array from the
7
host server.
This Step is Performed on the Storage
Array Using MD Storage Manager
Discover the storage array.
1
Configure the iSCSI ports on the
2
storage array.
Configure host access.
4
(Optional) Configure
5
Handshake Authentication
Protocol (
the storage array.
(Optional) Set up in-band
8
management.
Appendix—Manual Configuration of iSCSI
A
Challenge
CHAP) authentication on
57