Dell PowerVault MD3200 Deployment Manual page 31

Table 4-1. Initial Setup Tasks Dialog Box
Task
Rename the storage array
Set a storage array password
Set up alert notifications
Set up e-mail alerts
Set up SNMP alerts
Configure a storage array
Purpose
To provide a more meaningful name than the
software-assigned label, Unnamed.
To restrict unauthorized access. MDSM may
ask for a password before changing the
configuration or performing a destructive
operation.
To notify individuals (by e-mail) and/or
storage enterprise management consoles, such
as Dell Management Console, (by SNMP)
when a storage array component degrades or
fails, or an adverse environmental condition
occurs.
To create virtual disks and map them to hosts.
Post Installation Tasks
31