Dell PowerVault MD3060e Installation Manual page 11

For powervault md series storage arrays

Hide thumbs Also See for PowerVault MD3060e:

Table of Contents

Issue

The following message is displayed when you use the CIM

CLI application:

roundTripTime is incorrect in

ClientOpPerformanceData

Recommended Action

Return Code -4 message is displayed for any method

that runs. A specific error message is not displayed other

than the return value, but the SMI-S Provider trace log

shows that the method failed because of an

authentication failure. Update the Property -

Secret with the current storage array password in the

<OEM>SharedSecret instance by using Modify

Instance CIM. You can perform this operation from the

client used for communicating with SMI-S Provider (for

example, CIM Navigator).

You can ignore this message when using the CIM

command line interface.

Table of Contents