Related Manuals for Whirlpool AGB 440/WP
Summarization of Contents
Operating Instructions
Construction, Equipment Installed and Safety Devices
Describes the robust steel frame, tanks, burners, and safety thermostat.
Installation
Covers assembly, gas connection, and gas venting requirements.
Gas Connection
Details gas off-take size and flexible hose requirements.
Gas Venting
Explains flue gas outlet connection for construction types A and B.
Legal and Technical Requisites
Lists compliance requirements for national and local regulations.
Commissioning the Appliance
Before Commissioning the Appliance
Instructions for initial cleaning and preparation before use.
Start-up
Guides on checking gas type and adapting the appliance if needed.
Testing the Power Rating
Procedures for verifying operating pressure and nominal power.
Checking Input Pressure
Details how to measure input pressure using a gauge.
Checking Power Rating Using the Volumetric Method
Explains using a gas meter to measure gas output for capacity calculation.
Replacing Parts
Gas Valve
Instructions for replacing the gas valve component.
Safety Thermostat
Procedure for replacing the safety thermostat.
Burner
Steps for replacing the burner unit.
Thermocouple
Guidance on replacing the thermocouple.
Ignition Plug
Steps for replacing the ignition plug.
Using the Appliance
Lighting the Pilot Burner
Instructions for igniting the pilot flame.
Lighting the Main Burner
Procedure for lighting the main burner and setting temperature.
Turning Off
How to turn off the main burner and the appliance.
Taking Care of the Appliance
Frequency of Maintenance
Guidelines on the recommended frequency for maintenance tasks.
Need help?
Do you have a question about the AGB 440/WP and is the answer not in the manual?
Questions and answers