Opera 40810 Manual

Electric handle

Advertisement

Quick Links

ELECTRIC HANDLE
"OUVERTURE EXIT""

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 40810 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Technical Specifications
Product Versions
Details different versions of the electric handle, including activated/disabled states with or without current.
Installation
Handle Installation Procedure
Step-by-step guide for inserting, positioning, and fixing the electric handle, noting power requirements for different models.
Fixing and Spindle Drive Installation
Instructions for attaching the back plate, cylinder, and spindle drive, including screw length considerations.
Mode of Operation
Direct Activation Modes
Describes how models 40610 and 40810 operate directly with power supply, including LED indicators.
Dry Contact Activation Modes
Details operation for models 40611 and 40811 using dry contact and time delay settings.
Time Delay Configuration
Setting Time Delay to 0 Seconds
Instructions for setting the time delay to 0 seconds, allowing conversion between models like 40611 to 40610.
Setting Time Delay from 5 to 60 Seconds
Guide for configuring the time delay feature for the electric handle to remain enabled for a set duration.
Electric Hold Open Device Function
Information on enabling a hold-open function for the door using a parallel switch.
LED Lighting Control
White/Blue LED Deactivation Procedure
Procedure for deactivating the white/blue lower LED lighting on specific models.
White/Blue LED Activation Procedure
Procedure for activating the white/blue lower LED lighting on specific models.
Connecting Diagrams
Direct Electricity Activation Diagrams (DC/AC)
Diagrams illustrating DC and AC power supply connections for direct electricity activation of the handle.
Opening by Contact Diagrams (DC/AC)
Diagrams showing DC and AC power supply connections for opening the handle via contact.
Intercom Electric Handle Connection
Diagram detailing the electrical connection of the intercom system to the electric handle.

Table of Contents