Desa VSGF36NR Owner's Operation And Installation Manual page 13

INSTALLATION
Continued
INSTALLING FIREBOX USING
OPTIONAL ACCESSORY MANTELS
WARNING: A qualified service
person must install firebox. Fol-
low all local codes.
This firebox may be installed using a cabinet
mantel accessory against a wall in your home.
The firebox and cabinet mantel can be installed
directly on the floor. A trim kit is included with
the mantel accessories.
1. Assemble cabinet mantel accessory and the
trim kit. Assembly instructions are included
with each accessory.
2. Install gas piping to firebox location. See
Installing Gas Piping to Fireplace Location.
You may have to cut an access hole in the floor
or wall to run gas line to firebox. Make sure
to locate access hole so cabinet mantel will
cover it when installed (see Figure 11).
3. Place cabinet mantel on floor in desired loca-
tion. Make sure mantel is flush against wall.
4. Install the trim kit furnished with mantel. See
instruction sheet included with the mantel.
5. Carefully insert firebox into cabinet mantel. Be
careful not to scratch firebox, cabinet mantel,
flooring, etc. when installing (see Figure 12).
Cabinet
Mantel
Gas Line Access Hole
(Either Side of Firebox)
Figure 11 - Installing Cabinet Mantel
113192-01B
Gas Piping
www.desatech.com 13