Dell PowerVault MD1000 Installation Manual page 16

3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting holes align
with their respective holes on the back vertical rail.
4 Install two 10-32 x 0.5-inch flange-head Phillips screws in the back mounting-bracket flange's top-
and bottom-holes to secure the mounting rail to the back vertical rail.
5 Repeat step 1 through step 4 for the mounting rail on the other side of the rack.
6 Ensure that the mounting rails are mounted at the same position on the vertical rails on each side
of the rack.
Figure 1-6. Installing the VersaRails Mounting Rails
1 Mounting-bracket flange
10-32 x 0.5-inch flange-head
2
Phillips screws
(4 per mounting rail)
14
Rack Installation Guide
1
2
3
4
3 Front of rack
Mounting rail
4