Related Manuals for WAGO 4PU
Summarization of Contents
Safety Instructions
Information for Your Own Safety
Critical safety information, warnings, and cautions for operating the meter.
Qualified Personnel Requirements
Specifies that only qualified personnel should install and operate the device.
Intended Use and Proper Handling
Defines the device's intended applications and guidelines for safe handling and operation.
Product Specifications
Performance Criteria
Details operating humidity, storage humidity, accuracy class, and temperature range.
Basic Error Specifications
Lists acceptable error margins for various current and power factor conditions.
Bluetooth Communication Specification
Outlines the Bluetooth protocol and frequency range supported by the meter.
M-Bus Communication Specification
Details M-Bus communication parameters like bus type, baud rate, range, and protocol.
Modbus/RS485 Communication Specification
Specifies Modbus/RS485 communication parameters including bus type, protocol, and baud rate.
Device Dimensions and Weight
Provides physical dimensions (height, width, depth) and net weight of the energy meter.
Wire Connection Guidelines
Explains the connection technology and recommended wire types for WAGO series 2616 and 2604.
4PU Connection Diagrams
Illustrates connection diagrams for different configurations of the 4PU model.
4PS Connection Diagrams
Illustrates connection diagrams for different configurations of the 4PS model.
Installation Guide
Installation Safety Precautions
Critical safety warnings before and during installation, including power off and tool usage.
Installation Environment and Mounting
Guidelines for meter placement, protection against dust, ventilation, and DIN rail mounting.
Meter Operation
Display Part 1 (MID Relevant)
Shows MID relevant information like version, serial number, tariff, and measurement units.
Display Part 2 (MID Relevant)
Displays MID relevant measurement values identified by OBIS codes.
Display Part 3 (Non-MID Relevant)
Shows non-MID relevant data such as current direction, frequency, and power values.
Settings Menu Navigation
Explains how to enter the settings mode using the front buttons and navigate options.
Bluetooth Activation
Describes how to activate Bluetooth communication on the energy meter.
Button Settings Configuration
Details how to access and configure various settings like password, tariff, Modbus, etc.
SO Pulse Output Settings
Covers configuration of pulse output type, width, and related parameters.
Communication Settings (Modbus/M-Bus)
Configuration options for Modbus ID, Baudrate, Parity, and M-Bus ID/Baudrate.
Display and Counter Settings
Configuration for backlight, powerdown counter, and trip counter settings.
OBIS Code Identification
Lists and explains the OBIS codes used to identify measurement values on the display.
Combination Code for Energy Display
Explains how to set different calculation methods for displaying total energy usage.
Troubleshooting and Support
Maintenance Safety Precautions
Safety warnings and precautions for performing maintenance or repair on the meter.
Common Issues and Solutions
Guides users through common problems like LED not flashing or register not counting, with verification steps.
Error and Diagnostics Display
Explains how the meter indicates errors and the meaning of diagnostic display codes.
Technical Support Contact Information
Provides contact details for WAGO technical support for product inquiries.
Appendix 1: Multi-Tariff Function
Switching Between Tariffs T1 and T2
Describes the procedure for activating tariffs T1 and T2 via external voltage connection.
Switching Between Tariffs T3 and T4
Explains how to activate tariffs T3 and T4 using Bluetooth, Modbus, M-Bus, or button functions.
Appendix 2: M-Bus Communication
Communication via M-Bus
Details how to establish M-Bus communication with the meter using a PC and converter.
M-Bus Register Map
Provides a comprehensive list of M-Bus registers, their contents, and data types.
M-Bus Write Registers
Outlines commands and values for writing data to M-Bus registers.
Appendix 3: Modbus Communication
Communication via Modbus
Explains how to establish Modbus communication with the meter using an RS485 converter.
Modbus Register Map (Read)
Lists Modbus registers for reading data, including address, content, function code, and data type.
Modbus Register Map (Write)
Lists Modbus registers for writing data, including address, command, and new value.
Appendix 4: Bluetooth Configuration
WAGO Energy Meter Configurator App
Introduction to the smartphone app for reading and configuring meters via Bluetooth.
Connecting the Meter via Bluetooth
Steps for connecting the meter using the app's Scan Bluetooth or Scan QR functions.
Device Information Page
Displays meter type, serial number, software version, and checksums after connection.
Reading Meter Data
Explains how to access and view energy and instantaneous values through the app.
Saving Meter Data
Instructions on how to save and share meter data locally or via other channels.
Changing Meter Settings
Guide to selecting and saving individual or all settings, including password entry.
Need help?
Do you have a question about the 4PU and is the answer not in the manual?
Questions and answers