Related Manuals for Miele H387
Summarization of Contents
1.0 Construction and Design
1.1 Unit Overview – H 350
Overview of the Miele H350 oven, including its main components and functions.
1.2 Unit Overview – H 373, H387
Overview of the Miele H373 and H387 ovens, detailing their main components.
1.3 Data Tag
Explains the location and information found on the oven's data tag.
2.0 Installation
2.1 Electrical Information
Details power requirements and electrical connection procedures for the oven.
3.0 Commissioning and Operation
3.1 Before using for the first time
Guide on initial setup, cleaning, and first use of the oven.
3.2 Controls-Basic Overview
Explains the oven's control panel, buttons, and display symbols.
3.3 Using The Oven
Instructions on how to use the oven for cooking and various functions.
3.4 Rapid Heat
Explains the rapid heat feature and how it activates automatically.
4.0 Function and Description
4.1 Catalyser System (H387 Models)
Explains the function of the catalyser system in reducing odors during cooking.
4.1.2 Pyrolitic or Self-Cleaning (H387 Models)
Details the pyrolitic/self-cleaning process, including heating, door lock, and duration.
4.1.4 Safety Cut-Out
Explains the automatic safety shutdown feature based on operating mode and time.
4.1.6 Door Switch
Describes the function of the door switch and its effect on oven operation.
4.1.8 Automatic Door Lock
Details the automatic door locking mechanism during pyrolytic cycles.
4.1.10 Control And Power Electronic Unit
Describes the combined control and power electronics unit and its monitored components.
5.0 Service And Maintenance
5.1 Lay Out Of Electrical Components
Illustrates the layout of electrical components for various oven models.
5.2 Door - Removal
Step-by-step guide on how to remove the oven door.
5.3 Oven – Removal
Instructions for removing the entire oven from its housing.
5.6 Control Module - Removal
Guide for removing the oven's control module.
5.20 Upper Heater Element - Removal
Instructions for removing the upper heating element.
5.21 Lower Heater Element - Removal
Steps for removing the lower heating element.
5.24 Convection Heating Element - Removal
Steps for removing the convection heating element.
5.25 Convection Heating Fan - Removal
Instructions for removing the convection heating fan.
5.28 Catalyser - Removal (Pyrolytic/Self-Cleaning Models)
Steps for removing the catalyser from pyrolitic/self-cleaning models.
5.33 Door Locking Device – Removal (Pyrolytic/Self-Cleaning Models)
Procedure for removing the door locking device.
5.35 Door Lock Manual Override
Instructions on how to manually override the door lock.
6.0 Fault Diagnosis
6.1 Service Modes
Guide on accessing and navigating the oven's service modes.
6.2 Fault Codes
Overview of fault codes, their causes, and remedies.
6.3 Fault Repair
General troubleshooting guide for common oven faults and repairs.
6.4 Programming Mode
Overview of how to access and use the programming mode for settings.
Need help?
Do you have a question about the H387 and is the answer not in the manual?
Questions and answers