Download Print this page
Golden Technologies PR446 Owner's Manual

Golden Technologies PR446 Owner's Manual

Power lift & recline chair

Advertisement

Quick Links

Power Lift & Recline Chair
OWNER'S MANUAL
AND
LIMITED LIFETIME WARRANTY
PR446
PR448
401 Bridge Street
Old Forge, PA 18518
www.goldentech.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PR446 and is the answer not in the manual?

Questions and answers

Summary of Contents for Golden Technologies PR446

  • Page 1 Power Lift & Recline Chair OWNER’S MANUAL LIMITED LIFETIME WARRANTY PR446 PR448 401 Bridge Street Old Forge, PA 18518 www.goldentech.com...
  • Page 2 Dear Valued Customer, Thank you for purchasing this Golden Technologies Power Lift and Recline Chair. We are committed to providing our customers with the highest quality lift chairs. We believe that this product is made from the highest quality components available, is engineered to give you maximum service with minimum maintenance, and is backed by the strongest warranty in the industry.
  • Page 3 Safety Guidelines The symbols below are used in the owner’s manual and/or on the product to identify warnings and notify you of important safety information. Make sure you read and understand them completely. WARNING! Indicate(s) a hazardous situation which, if not avoided, could result in death or serious injury.
  • Page 4 continued from previous page Safety Guidelines Class II Device! Indoor use only! Do Not Smoke! Electrical hazard! Do not dispose in trash!
  • Page 5 Your power lift and recline chair has been engineered from the leg levelers up to provide the ultimate in strength and reliability. Great care has been taken to provide you with total comfort and safety. Golden Technologies thoroughly inspects and tests each unit prior to shipment.
  • Page 6 Do not smoke while operating, sitting or resting in the chair. To reduce risk of electrical shock, do not immerse any of the electrical components into a liquid, or spill any liquids onto electrical components. Do not open any of the electrical components. There are no serviceable parts.
  • Page 7 Consult the owner’s manual of the chair and a physician to determine if you are capable of moving or lifting the chair, as this will cause serious injury if not done properly. Verify that all objects including hands and fingers are not between the arm of the chair and the open compartment before closing the compartment as this will result in property damage or serious injury.
  • Page 8 Installation Of Your Power Lift Chair Models: PR446-MED, PR446-LAR, PR448-MLA Read before assembly. 1. Remove the transformer, hand control, and power wire from the wooden cross rail (located behind the lower outside back) by removing the white zip tie. Place transformer on the floor behind the chair.
  • Page 9 6. Zipper the back and the seat fabric together to eliminate the gap between them. Zipper 7. Attach the bottom of outside back to the Velcro on the arm cross rail. 8. Place the chair in the desired position in the room, keeping it 21" away from the wall.
  • Page 10 Initial Hand Control Setup This setup is required to ensure proper operation of your lift chair's control system. ZK3200-HC Setup/Reset Procedure: Press and hold both buttons (S1) Backrest down and (S3) Footrest up simultaneously (see photo) until the chair stops moving. Continue to hold both buttons simultaneously for an additional three seconds.
  • Page 11 & L rive uMbar ontroL Peration 1. Getting into your lift chair. While standing next to your chair, press button (S7) and raise the chair to a height you can sit against. This height will vary from person to person depending on the individual’s needs. Raise the chair high enough so you do not have to flop down into the chair.
  • Page 12 Programming the Memory Buttons S5, S6, S8 and S10 Press one of the preprogrammed buttons (S5, S6, S8, S10) and hold until the chair stops. Press buttons (S1 thru S4) to micro adjust those positions to suit your needs. Use the following procedure to reprogram (S5, S6, S8, S10) buttons after you have the chair in your desired position.
  • Page 13 Lights Out Feature: This feature will automatically shut off the backlight on the hand control after a specified period of inactivity (approximately 15 seconds). To activate the “Lights Out Feature”, follow the procedure below. 1. Press and hold the (SP) button “M”, until the backlight starts flashing. 2.
  • Page 14 Model: PR448 Compartment and Features Wireless Charger - Allows you to charge your cell phone by simply laying the device on the charging pad. Storage Compartment - Allows for convenient storage and easy access of your TV remote control. USB Port - Allows you to use and/or charge your electronic devices such as a tablet or laptop.
  • Page 15 This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. All warranty claims must be approved by Golden Technologies before any service is performed. Warranty is valid in all 50 states, Canadian Provinces and Puerto Rico.
  • Page 16: Care And Maintenance

    CARE AND MAINTENANCE our lift chair will require routine maintenance checks. You can perform some of these checks, while others may require assistance from a provider. By following these maintenance checks, you can make sure your lift chair gives you years of trouble-free operation. If you have any questions or concerns regarding your lift chair’s care and maintenance, contact your provider.
  • Page 19 Inquire about these fine mobility products also available from Golden Technologies f you’re looking for the perfect portable scooter loaded with style, look no further than the Buzzaround XL! Featuring a 300 lb. weight capacity, the Buzzaround XL disassembles quickly and easily.
  • Page 20: For Your Records

    FoR YoUR ReCoRDs Please fill in your Power Lift & Recline Chair information below. This information will be useful in the event that you should ever need to contact Golden Technologies, Inc. concerning your lift chair. Date of Purchase _____________________________________________ Model ______________________________________________________ Serial Number _______________________________________________ Your Golden Technologies, Inc.