Dell PowerVault 735N Update Manual page 5

Click Next.
19
The VERITAS Backup Exec Setup window shows files being copied. After the files
have been copied, the Service Account window displays.
In the User name and Password fields, enter the user name and password for the
20
account that you want the system services to use. The user must have administrator
privileges.
When the Previous Backup Exec Installation window displays, click OK.
21
The VERITAS Windows NT/2000 Device Driver Installs Welcome screen displays.
Click Next.
22
The Choosing Tape Drives window displays.
Make sure that Use VERITAS tape drivers for all tape devices is selected and then
23
click Next.
The Scanning Hardware window displays the devices and drivers found by the scan.
Click Next.
24
The Installing VERITAS Windows NT/2000 Device Drivers window displays.
Click Next.
25
The Completing the VERITAS Windows NT/2000 Device Driver Installation
window displays.
Click Finish to complete the installation of the device drivers.
26
The Select Type of Program Group window displays.
Select Common Program Group or Private Program Group and then click Next.
27
A Question screen displays that asks whether you want to install Agent Accelerator on
remote systems.
Click No.
28
If you want to install Agent Accelerator, see the VERITAS Backup Exec online
documentation for assistance.
The Setup Complete window displays.
L o c al Ba ck up 1-3