Updating Storage Systems Attached To Cluster Servers; Table 1-1. Firmware Update Procedures - Dell PowerVault 220S Updating Firmware

FILE LOCATION: S:\systems\Zappa\Ts\EMM Firmware_N8865\N8865eb0.fm
Table 1.1 lists the required tool and files for applying an update to your storage system.

Table 1-1. Firmware Update Procedures

Operating System
®
Microsoft Windows
Server and Advanced Server
Microsoft Windows Server™ 2003 FUPG_Exx.exe (A.M.)
Microsoft Windows Server 2003
Enterprise Edition (64-bit)
®
Novell NetWare
®
Red Hat Enterprise Linux (Version
®
3) for Intel x86
Red Hat Enterprise Linux (Version
®
3) for Intel Extended Memory 64
Technology (EM64T)
Red Hat Enterprise Linux (Version
3) for Intel Intanium
Red Hat Enterprise Linux AS
(Version 2.1)
Red Hat Linux, versions 7.x, 8.x, 9

Updating Storage Systems Attached to Cluster Servers

To update the EMM firmware in a cluster-attached storage system, perform the following steps:
1
Shut down node 2 in the cluster.
2
On node 1, update the EMM firmware in the attached storage system using the procedure
found later in this document that applies to your host configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 2 6 / 0 4 – F O R P R O O F O N LY
6
Updating the Enclosure Management Module Firmware
Download File
®
FUPG_Exx.exe (A.M.)
2000
or
PV220s-221s-FRMW-
Rxxxxx.exe (DUP)
or
PV220s-221s-FRMW-
Rxxxxx.exe (DUP)
pv2xxAxx.exe
®
FUPG_Exx.exe
PV220s-221s-FRMW-
Rxxxxx.bin
pv2xxAxx.gz
and
FUPG_Exx.exe
pv2xxAxx.gz
®
PV220s-221s-FRMW-
Rxxxxx.bin
pv2xxLxx.gz
Array DUP
Manager
Update Utility