Download Print this page
Dell PowerVault 114T 2U Installation And Instructions Manual
Dell PowerVault 114T 2U Installation And Instructions Manual

Dell PowerVault 114T 2U Installation And Instructions Manual

Fx973 ferrite core kit

Advertisement

Quick Links

TM
Installation and Removal Instructions for Dell PowerVault
114T
FX973 Ferrite Core Kit
If ferrites are present, there is no need to replace or install new ones. When replacing SCSI cables or power
supplies with ferrites attached, refer to
Adding Ferrites to New SCSI Cables or Power Supply
to open ferrites.
Power Cables – Ferrite Installation
Place one ferrite on each of the power cables that connect to the tape drive (see Figure 1-2).
Figure 1-1. Open Ferrite for Power Cable
Figure 1-2. Ferrites Installed on Power Cables
October 2007

Advertisement

loading

Summary of Contents for Dell PowerVault 114T 2U

  • Page 1 Installation and Removal Instructions for Dell PowerVault 114T FX973 Ferrite Core Kit If ferrites are present, there is no need to replace or install new ones. When replacing SCSI cables or power supplies with ferrites attached, refer to Adding Ferrites to New SCSI Cables or Power Supply to open ferrites.
  • Page 2 SCSI Cables – Ferrite Installation Remove the backing from the adhesive tape and adhere the open ferrites to the back bays underneath the SCSI cables (see Figure 1-4). Figure 1-3. Open Ferrite for SCSI Cable Figure 1-4. Ferrites Adhered to the Back Bays...
  • Page 3 Close the ferrites to complete the installation on SCSI cables (see Figure 1-5). Figure 1-5. Ferrites Installed on SCSI Cables Refer to Figure 1-6 for the completed installation of the ferrites on SCSI cables and power cables. Figure 1-6. Ferrites Installed on SCSI Cables and Power Cables...
  • Page 4 Adding Ferrites to New SCSI Cables or Power Supply Use your fingers and/or a flat blade screwdriver to pry open the ferrites surrounding the power and SCSI cables. See Figure 1-7 for opening ferrite on power cable and Figure 1-8 for opening ferrites on SCSI cable. Please make sure the ferrites are placed on your new SCSI cable or power supply.
  • Page 6 Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

This manual is also suitable for:

Powervault 114t