Related Manuals for Makita BTD064Z
Summarization of Contents
Specifications
Symbols
Explanation of symbols used for the equipment to understand their meaning before use.
Intended Use
The tool is intended for screw driving in wood, metal and plastic.
Noise and Vibration Data
Typical noise and vibration levels for BTD044, BTD064, BTD104 according to EN60745.
Wear Ear Protection
Recommendation to wear ear protection due to noise levels.
General Power Tool Safety Warnings
Work Area Safety
Safety guidelines for maintaining a clean, well-lit work area and avoiding explosive atmospheres.
Electrical Safety
Precautions regarding plugs, grounding, wet conditions, cords, and GFCI protection.
Personal Safety
Advisories on staying alert, using PPE, preventing unintentional starting, and proper dress.
Power Tool Use and Care
General Usage and Maintenance
Guidelines for using and maintaining power tools, including not forcing them, proper storage, and battery care.
Cordless Impact Driver Specific Safety
Safety Precautions
Product-specific safety warnings for handling, footing, and working at heights.
Important Safety Instructions for Battery Cartridge
General Battery Safety
Precautions for using battery cartridges, including not disassembling, handling short circuits, and avoiding heat.
Battery Handling and Storage
Guidelines for handling and storing battery cartridges, avoiding extreme temperatures and fire hazards.
Functional Description
Checking Remaining Battery Capacity
How to check the remaining battery capacity using indicator lamps.
Installing or Removing Battery Cartridge
Procedure for safely installing and removing the battery cartridge from the tool.
Auto-Stop Mechanism
Explanation of the auto-stop mechanism for preventing over-discharging the battery.
Battery Protection System
Description of the battery protection system that cuts off motor power to extend battery life.
Switch and Operation
Switch Action
How to start, stop, and control tool speed using the switch trigger.
Reversing Switch Action
How to change the direction of rotation using the reversing switch lever.
Turning on the Lamp
How to activate and deactivate the tool's built-in lamp.
Auto-Stop Setting for Number of Impacts
How to preset the desired number of impacts for automatic stopping.
Presetting Number and Action
Confirming Current Setting Number
How to check the currently set number of impacts.
Relation Between Presetting Number and Action
Describes the relationship between preset impact numbers and tool actions, including indicator lamp behavior.
Assembly
Installing or Removing Driver Bit or Socket Bit
Procedure for installing and removing driver bits or socket bits.
For Tool with Shallow Bit Hole
Instructions for using specific bit types with shallow bit holes.
For Tool with Deep Bit Hole
Instructions for using specific bit types with deep bit holes.
Operation
Installing or Removing the Bit
Step-by-step guide to install and remove bits using the sleeve mechanism.
Fastening Torque
Information on fastening torque, time, and impact numbers for different bolts and models.
Fastening Torque Charts
Standard Bolt Charts
Charts showing fastening torque for standard bolts (M6, M8, M10, M12) for BTD064 and BTD104.
High Tensile Bolt Charts
Charts showing fastening torque for high tensile bolts (M6, M8, M10) for BTD064 and BTD104.
Operation Notes
Notes on using proper bits, holding the tool straight, and performing test operations.
Maintenance
Factors Affecting Fastening Torque
Details on how battery discharge, bit type, bolt class, and tool handling affect fastening torque.
Replacing Carbon Brushes
Step-by-step instructions for replacing worn carbon brushes.
Optional Accessories
Recommended Accessories
List of recommended accessories for use with the Makita tool.
Need help?
Do you have a question about the BTD064Z and is the answer not in the manual?
Questions and answers