Connect Power; Prepare The Remote Control - Philips DCM250 User Manual

Connect power

Caution
•
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the DCM250.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before connecting the AC adaptor, ensure you have
completed all other connections.
1
Connect the power cord to the AC
adaptor.
2
Connect one end to the DC socket on
the main unit.
3
Connect the other end to the wall socket.
14 EN

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
•
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.