Get Started; Connect Fm Antenna; Connect Am Antenna - Philips DCM250 User Manual

3 Get started

Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your DCM250. The
model number and serial number are on the
bottom of your DCM250. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Connect FM antenna

Tip
•
For optimal reception, fully extend and adjust the
position of the antenna.
1
Connect the supplied FM antenna to the
FM aerial jack on the main unit.
FM aerial

Connect AM antenna

1
Assemble the AM loop antenna.
2
Connect the AM loop antenna to the AM
aerial jack on the rear of the main unit.
Note
•
Position the antenna as far as possible from a TV, VCR
or other radiation source.
AM aerial
EN 13