Line-Out - Sonos Controller for iPad Product Manual

Chapter 4: Managing and Playing Music
Choose one of the following options:
2.
• To play music from this line-in source, select Line-in from the Music Menu, select the room the device is connected to,
and touch Play Now.
• To change the settings for this line-in source, select ZonePlayer Settings from the Settings menu.
Select the Sonos component this device is connected to, and then touch Line-In.
• Line-In Source Name: Select a component name from the list.
• Line-In Source Level: A default (typical) line-in source level is automatically assigned based upon the source
name. (If the volume sounds too low, you can select a higher line level. You may experience clipping at higher vol-
ume levels if you set the level too high.)
• Autoplay Zone: Select the room you want your line-in source to play in whenever it's connected to Sonos. You can
also select Include Grouped Zones so that any rooms grouped with the autoplay zone will play the same music.
• Autoplay Volume. Use the slider to set the default volume for the autoplay zone when the line-in source is con-
nected. Check the Use Autoplay Volume checkbox if you intend to use your line-in device to adjust the volume in
the autoplay zone.

Line-out

You can easily connect your home theater, stereo, or powered speakers to a CONNECT. Depending on the model, you can use
analog or digital audio outputs to connect to an external amplifier. The SONOS CONNECT (90) has both digital and analog
outputs, while the ZonePlayer 100 has analog outputs. The SONOS CONNECT:AMP (120) is not designed with audio outputs.
For instructions on connecting a device, see the documentation included with your Sonos component. Also, go to http://
faq.sonos.com/lineout for instructions.
For additional information on connecting audio devices, you can go to our Web site at http://faq.sonos.com/cables.
4-17