Configuring Livecycle Products With Ldaps - Adobe LIVE CYCLE 7.2 - INSTALLING AND CONFIGURING LIVECYCLE FOR JBOSS Manual

Adobe LiveCycle
Installing and Configuring LiveCycle for JBoss

Configuring LiveCycle products with LDAPS

Use the following procedure as a guideline when configuring User Management to support
authentication using LDAPS.
➤
To configure User Management with LDAPS:
1. Enable SSL on the directory server. For details, see the documentation provided by your directory
vendor.
2. Export a client certificate from the directory server.
3. Use the keytool program to import the client certificate file into the default JVM certificate store. The
procedure for this varies depending on your JVM and client install paths. For example, if you are using
JDK 1.4.2, from a command prompt, type the following code:
keytool -import -file client_certificate -alias myalias -keystore
jdk142_08/jre/lib/security/cacerts
When prompted, enter the password (for Java, the default password is
message stating that the certificate was imported successfully.
4. Enable SSL in User Management. To access the User Management settings, select Settings > User
Management in the Administrator pages. When configuring the directory settings, select Yes for the
SSL property, and change the Port property accordingly. The default port number is 636.
Troubleshooting
If you experience problems when using SSL, use an LDAP browser to check whether it can access the LDAP
system when using SSL. If the LDAP browser cannot access the LDAP system, the issue is related to the
configuration of your certificate and application server. If the LDAP browser can access the LDAP system,
User Management is not configured properly.
Configuring LiveCycle Products to Access LDAP
Configuring LiveCycle products with LDAPS
). You will receive a
changeit
69