MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX 2 Use Manual page 82

Starting the ColdFusion/Flex Application wizard
To start the ColdFusion/Flex Application wizard:
Configure your RDS servers. For more information, see
1.
In Flex Builder, select File > New > Other.
2.
Under ColdFusion Wizards, select ColdFusion/Flex Application Wizard, and then click
3.
Next.
After reading the introductory text, click Next.
4.
To load the settings from an application you previously created using the ColdFusion/Flex
5.
Appliation wizard, select the configuration file, and then click Load ColdFusion/Flex
Application Wizard Settings.
Click Next.
6.
Select the RDS server on which you want the application to reside.
7.
Specify the data source to use. The data source is configured in the ColdFusion MX
8.
Administrator.
Although you specify one default data source at this point, you can access data from other
data sources in your application.
Click Next.
9.
Specifying form layout
The Form Layout dialog box lets you specify the pages to use in your application. You can
create master, detail, or master/detail pages. In your application, you can link master, detail,
and master/detail pages as follows:
Page type Can link to
master master
master/detail
detail
master and detail
master and master/detail
master/detail master
master/detail
82 Using the ColdFusion Extensions for Flex Builder
"Configuring RDS" on page 76.