MACROMEDIA COLDFUSION MX 7.0.2-USING COLDFUSION MX WITH FLEX 2 Use Manual page 34

Run the application
To run the Flex application, you browse to the MXML file.
Open the http://localhost:8700/samples/dataservice/myapp/flexemail2cf.mxml file in a
1.
browser.
Enter a valid e-mail address in the To text box. Ensure that the e-mail address is one whose
2.
incoming e-mail you can check.
Enter the name of the sender in the From text box.
3.
Enter the subject in the Subject text box.
4.
Enter the message in the Message text area.
5.
Click Send.
6.
Check e-mail messages
To ensure that the application executed successfully, check the e-mail messages of the recipient
specified in the Flex application. There should be an e-mail message sent from the sender,
with the subject and body that you specified in the Flex application.
34 Use ColdFusion Event Gateway Adapter