MACROMEDIA COLDFUSION MX 61 - INSTALLING AND USING COLDFUSION MX Using Manual page 55

To verify your IIS configuration:
Verify that the following file was created: cf_root\runtime\lib\wsconfig\jrun.dll (server
1
configuration) or jrun_root/lib/wsconfig/jrun.dll (JRun J2EE configuration). On IIS6, this file
is named jrun_iis6.dll.
For each of your IIS websites, verify that application mappings for .cfm, .cfml, .cfc, .jsp, and
2
.jws were added, as follows:
In IIS, right-click an IIS website and select Properties.
a
In the Properties dialog box, on the Home Directory tab, click Configuration.
b
In the Application Configuration dialog box, click the App Mappings tab.
c
You should see mappings for .cfm, .cfml, .cfc, .jsp, and .jws in the Extension column.
Verify that each of your IIS websites has a virtual directory called JRunScripts.
3
The following figure shows a sample JRunScripts virtual directory:
Verify that the JRunScripts directory in each of your IIS websites points to the correct location,
4
as follows:
Right-click the JRunScripts directory and select Properties.
a
In the Properties dialog box, on the Virtual Directories tab, verify that the Local Path text
b
box contains the following path:
path/wsconfig/number (typically 1)
Configuring Netscape Enterprise or iPlanet web server in Windows
This section describes how to configure Netscape Enterprise web server 3.6x or iPlanet web server
(4.x or 6.x) for ColdFusion MX in Windows, and how to verify your configuration. You
configure Netscape or iPlanet using the Web Server Configuration Tool in either GUI or
command-line mode. This discussion describes how to use GUI mode. To use the command line,
open the batch files located in cf_root\bin\connectors. For more information, see the Web Server
Management chapter of Configuring and Administering ColdFusion MX.
Configuring web servers 55