GRASS VALLEY JUPITER CM-4400 - VERSION 7.9.0 - 10-2010 Installation And Operating Manual page 68

Section 2 — Hardware Installation
Non-sequential Path Finding (Path Finding Using Non-sequential Wiring)
68
Figure 30. Example of Sequential Path Finding Connections
CC 2010 Matrix
cable. 50 ft.
(15.2 m) max.
CM 4400 System Controller
10/100baseT
Jupiter LAN
Hub
CM 4400 System Controller
In some cases, especially when adding tie lines to an existing system,
wiring new lines out of sequence may be desirable.
shows example connections for one level.
The Maximum length that the CC-2010 Matrix cable can be, when con-
necting the CM-4400 to the Router, is 50 ft. (15.24 m). Grass Valley recom-
mends installing a separate CM- 4400 System Controller for each switcher
using the CC-2010 Matrix cable.
JUPITER CM-4400 Control Module Installation and Operating Manual
Inputs
20 21 22
Grass Valley
Crosspoint Bus
distribution switcher
"A"
10
11
12
13
14
Outputs
Crosspoint Bus port
CC 2010 Matrix cable.
50 ft. (15.2 m) max.
Crosspoint Bus port
distribution switcher
Tie lines can be connected
starting with any input or out-
put but must then follow in
sequential order.
Inputs
43 44 45 46 47
Grass Valley
Crosspoint Bus
Outputs
"B" 61
62
63
Figure 31 on page 69