Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Herz pelletstar CONDENSATION 45
Summarization of Contents
Introduction and Warranty Information
Warranty and Guarantee Details
Covers warranty periods, terms, conditions, and exclusions for HERZ boilers.
Safety Notes
Basic Safety Information
Understand instructions, qualified personnel, heed warnings for safe operation.
Installation and Operation Safety
Adhere to standards, manufacturer instructions, and heed warnings for safe use.
Warning Notes
General Safety Warnings
Covers risks of injury, hot surfaces, hand injuries, and unauthorized access.
Fuels
Wood Pellets Specifications
Details on wood pellet quality, fines content, calorific value, and density.
Safety Devices
Boiler Safety Components
Covers STL, BBP, safety valve, heat exchanger, and ash container devices.
System Overview
Discharge System Examples
Examples of flexible screw and suction systems for fuel discharge.
Boiler Overview
Pelletstar Condensation with Screw Discharge
Detailed components of the boiler with screw discharge system.
Pelletstar Condensation with Integrated Suction Hopper
Detailed components of the boiler with integrated suction hopper.
Pelletstar Condensation with Integrated Hopper (Hand Filling)
Detailed components of the boiler with manual fill hopper.
Mode of Operation
Fuel Feeding Systems and Types
Covers flexible screw, suction, manual feeding, and types.
Boiler Operational Processes
Details combustion air, boiler operation, commissioning, and temperatures.
Operating Conditions
Boiler Operating States
Describes states like Heating Off, Ready, Ignition, Cold Start, and Regulation.
Boiler Control Functions
Covers burner cleaning, heat exchanger cleaning, output, and flue gas control.
Monitoring and Protection
Covers flame monitoring, freezing protection, and lambda control.
Temperature Manager
Temperature Management Overview
Controls heat demand for modules based on temperatures.
Temperature Manager Examples
Illustrates temperature management scenarios with and without buffer.
T-CONTROL System Operation
System Start and Navigation
Starting the system and navigating the touch panel interface.
Menu Functions and Basic Settings
Main menu, symbols, code entry, date/time, value management.
Boiler Operation Controls
Switching boiler on/off and using the chimney sweeping function.
System Configuration Settings
Network, Modbus, screensaver, remote, email, and service configurations.
Module Settings Overview
Settings for Boiler, Buffer, Hot Water Tank, Heating Circuit modules.
Fault Reports and Corrections
Fault Code Overview and Indicators
Table of fault codes with indicators (Info, Warning, Fault).
Detailed Fault Diagnosis and Resolution
Comprehensive guide to identifying and correcting faults across various systems.
Non-Indicated Faults
Common operational issues not directly flagged by fault codes.
Maintenance Schedule
Routine Inspections
Procedures for weekly and monthly visual checks and cleaning.
Periodic Inspections
Tasks for biannual and annual service, including fan and heat exchanger checks.
As Needed Maintenance
Chimney cleaning and fuel storage room checks.
EU Declaration of Conformity
Manufacturer and Product Details
Information on manufacturer, product types, and compliance statements.
Regulatory Compliance
Lists relevant EC/EU directives and standards for product compliance.
Annex: Hydraulic Recommendations
Hydraulic Diagrams (Programs 1-6)
Schematic representations of system hydraulic configurations.
Need help?
Do you have a question about the pelletstar CONDENSATION 45 and is the answer not in the manual?
Questions and answers