Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Herz pelletstar CONDENSATION 30
Summarization of Contents
Safety Notes
Basic Safety Information
Essential safety guidelines for system operation and maintenance.
Installation Safety Guidelines
Requirements and standards for proper system installation.
Operation and Maintenance Safety
Guidelines for safe system operation, including general notes, procedures, and maintenance.
Fuels
Wood Pellets Specifications
Specifies the required quality and properties of wood pellets for optimal boiler operation.
Safety Devices
Temperature Limiting and Safety Valves
Devices like STL, safety valve, and heat exchanger for over-temperature protection.
Burn-back and Ash Container Safety
Units preventing fuel backflow and sensors for ash container safety.
Fuel Storage Room Monitoring
Monitors storage room temperature and switches boiler off if preset limit is exceeded.
System Overview
Boiler Room Discharge Systems
Explains different room discharge and storage room filling systems with examples.
Boiler Component Breakdown
Provides a detailed breakdown of the pelletstar boiler components.
Mode of Operation
Fuel Feeding System
Describes how fuel is fed from storage to the burning chamber.
Fuel Conveyor System Variants
Details different fuel transport systems like flexible screw and suction.
Feeding Type and Combustion Air Control
Explains feeding control and air management for efficient combustion.
Boiler Operation and Commissioning
Covers automatic start-up, temperature control, and mandatory commissioning.
Operating Temperature Management
Covers boiler temperatures, back flow, and safety limits.
Operating Conditions and Control
Boiler Operating States
Describes states like Heating Off, Ready, Ignition Prep, Pre-aeration, Cold Start, Scorch, Start Up, Regulation, Burn Out, Burner Cleaning.
Automatic Cleaning Processes
Details automatic heat exchanger cleaning.
Control Mechanisms
Explains boiler output control, flue gas temp control, flame monitoring, freezing protection, and lambda control.
Temperature Manager Functionality
System Overview and Logic
Explains how the temperature manager controls heat demand from various modules based on must-temperatures.
Temperature Control Examples
Illustrates temperature management with and without buffer, and with time modes.
T-CONTROL System Operation
System Startup, Navigation, and Basic Settings
Covers system startup, handling the touch panel, main menu, symbols, code entry, date/time, and menu values.
Interface Symbols and Code Entry
Explains symbols used in the interface and code entry for accessing features.
Boiler Control and Settings Management
Details switching boiler on/off, date/time settings, and managing main menu values.
Faults, Modules, and Definitions
Explains fault messages, module overviews, configurations, and defines terms.
Module-Specific Settings
Detailed settings for Boiler, Buffer, Hot Water Tank, Solar, etc.
System Configuration and Network Settings
Covers network setup, Modbus settings, and system configuration.
Remote Access and Communication Settings
Explains remote maintenance, sending emails, and mail server settings.
Service Special and Cascade Functions
Details service special functions and cascade system overview.
Fault Reporting and Troubleshooting
Fault Code Overview and Classification
Presents a grid of fault codes with their classification (Info, Warning, Fault).
Detailed Fault Causes and Corrections
Detailed list of faults, their causes, and recommended correction steps.
Non-Indicated Faults and Solutions
Describes faults not directly indicated by error codes, with causes and corrections.
Maintenance Schedule and Procedures
Routine System Inspections
Covers weekly and monthly inspection tasks for the boiler system.
Periodic and Annual Maintenance
Details biannual and annual inspection and service procedures.
Ad-Hoc and Storage Room Maintenance
Tasks for chimney cleaning and fuel storage room maintenance.
EU Declaration of Conformity
Product Compliance Information
Details manufacturer, product types, and compliance with EC/EU directives and standards.
EU Emissions Regulations Compliance
Annual Space Heating Emissions Data
Table showing annual space heating emissions for different boiler models.
Technical Annex and Schematics
Additional Boiler Hydraulic Schematics
Provides schematic diagrams for hydraulic recommendations for additional boilers.
Solar Module Schematic Programs
Contains schematic representations of solar modules across different programs.
Need help?
Do you have a question about the pelletstar CONDENSATION 30 and is the answer not in the manual?
Questions and answers