Related Manuals for Bang & Olufsen 6210
Summarization of Contents
How to Service
Service Strategy and Preparations
Defines service approach, customer fault diagnosis, and necessary preparations.
Tools, Handling, and Safety
Lists essential tools, handling procedures for static electricity, safety symbols, and cleaning.
Repair Tips
Troubleshooting Common Issues
Addresses hum, no power, and LED status interpretation for effective diagnosis.
Speaker Unit Verification
Details speaker unit impedance checks to identify potential defects.
Replacement of Spare Parts
Speaker Unit and Module Replacement
Procedures for replacing speaker units and filter modules, with adjustment notes.
Main Chassis Replacement
Notes that no adjustment is required for the main chassis module replacement.
Adjustments
Filter Module Adjustment
Details adjusting the filter module on PCB4 and accessing adjustment points.
Speaker Adjustment Table
Provides a table correlating speaker values to switch positions for adjustment.
Final Check After Repair
Insulation Test and Restore Setup
Guides on performing insulation tests and restoring system setup post-repair.
Sound Check and Cleaning
Details verifying sound output and cleaning the product after servicing.
Remove Front Cover
Front Cover Removal Steps
Illustrates the steps to push and pull out the front cover.
Replace Left Baffle
Left Baffle Removal and Replacement
Steps for removing screws, plugs, and modules to replace the left baffle.
Replace Right Baffle
Right Baffle Removal and Replacement
Instructions for replacing the right baffle, similar to the left side.
Replace Main Chassis
Main Chassis Removal Steps
Steps for removing screws and pulling out the main chassis, noting voltage configurations.
Replace PCB2, ICE-Power Module
PCB2 (ICE-Power Module) Replacement
Guide for replacing the ICE-Power module by removing screws and plugs.
Replace PCB4, Filter Module
PCB4 (Filter Module) Replacement
Steps for replacing the filter module by removing screws and plugs.
Replacement of Woofer
Woofer Unit Replacement Procedure
Illustrates removing screws and plugs to replace the woofer unit.
Specification Guide Lines
Technical Specifications Overview
Provides detailed technical data for service use, including dimensions, power, and frequencies.
Connections, Indicators, and Power Consumption
Details connection types, LED indicators, and power consumption.
Overall Block Diagram
System Functional Block Diagram
A high-level schematic showing the main functional blocks of the BeoLab 7-1.
Wiring Diagram
Detailed Electrical Wiring Schematic
Detailed schematic illustrating all electrical connections and component interdependencies.
Available Parts
Component Parts List and Identification
Lists BeoLab 7-1 components with part numbers and descriptions.
Hardware, Packing, and Accessories
Details screws, packing materials, and available accessories.
Need help?
Do you have a question about the 6210 and is the answer not in the manual?
Questions and answers