Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Texecom CEL-0007
Summarization of Contents
Introduction
Product Types and Part Ordering Codes
Lists Premier Elite panels and compatible SmartCom/SmartCom 4G models.
Requirements for Texecom Monitor
Requirement summary
Outlines prerequisites and standards for Texecom Monitor service compliance.
Firmware Versions
Details required firmware for Premier Elite and SmartCom for service functionality.
Technical information on the service provision
Explains "Store and Forward", substitution, and information security methods.
Availability Monitoring
Describes Texecom's service availability monitoring against EN50136-1 standards.
Certified Configurations
Lists configurations independently tested and approved for SmartCom and Premier Elite systems.
Compliant Configurations
Details configurations designed and tested by Texecom for compliance.
BS9263:2016 preventative maintenance visits
Specifies preventative maintenance visit frequency based on system grade.
Specifications
SmartCom
– CELA1000
Provides detailed technical specifications for the SmartCom CELA1000 model.
SmartCom 4G CEL A0050
Details technical specifications for the SmartCom 4G CEL A0050 model.
Weights & Dimensions
Shows the physical dimensions and weight of the SmartCom device.
Warranty
Outlines the warranty period and terms for the SmartCom product.
Supplier Information
Provides contact details and address for the supplier, Texecom Ltd.
Declaration
States compliance with WEEE Directive and EU declaration of conformity.
Installation Guide
Texecom Monitor Overview
Introduces Texecom Monitor as a primary alarm signalling service for Premier Elite systems.
Select your chosen Alarm receiving centre (ARC).
Guides users on selecting and linking with an Alarm Receiving Centre (ARC).
Creating your first site application
Details the process of creating a new site application within Texecom Cloud.
Installing your panel and SmartCom
Mentions installing the panel and communicator, referring to later instructions.
Connecting your system to Texecom Monitor
Explains connecting the installed system to the Texecom Cloud service.
Connection contracts and payments
Details service contract, charges, and responsibilities between Texecom and ARC.
Getting started.
Connect to an ARC
Explains linking a Texecom Cloud account with an Alarm Receiving Centre (ARC).
Adding a site to Texecom Monitor
Describes the five steps involved in adding a site for monitoring.
Select the service and contract
Guides users through selecting services, communicator type, and contract terms.
Naming and adding site details
Details inputting customer and site information into Texecom Cloud.
Making an Application to the ARC
Explains submitting a site application to the chosen ARC via Texecom Cloud.
Installing and configuring your panel for Texecom Monitor..
SmartCom and SmartCom 4G Opening & Identification
Discusses features and identification of SmartCom and SmartCom 4G devices.
4G Module LED indications
Explains the meaning of LED indicators on the SmartCom 4G module.
SmartCom Removal from Mounting Tamper
Provides instructions on safely removing the SmartCom from its mounting.
SmartCom Connecting to the Panel
Provides instructions on physically connecting the SmartCom to the Premier Elite control panel.
SmartCom Managed Networks
Details network configuration requirements for SmartCom on managed or restricted networks.
Connecting to Wifi
Explains establishing a WiFi connection for the SmartCom, requiring network credentials.
Connecting to 4G mobile networks
Describes connecting the SmartCom 4G, including LED indicators and antenna placement.
Configuring your Premier Elite System
Guides users through configuring the Premier Elite system for Texecom Monitor.
Connecting the system to the Texecom Monitor service
Explains connecting the panel to the Texecom Cloud service.
Testing your alarm signalling to the ARC
Details testing alarm signalling functionality with the Alarm Receiving Centre (ARC).
Appendices
Panel Configuration
– When without Monitor mode.
Outlines panel configuration steps for systems not using Texecom Monitor.
SmartCom how to default to factory settings
Provides instructions on resetting the SmartCom device to factory default settings.
Need help?
Do you have a question about the CEL-0007 and is the answer not in the manual?
Questions and answers