Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Texecom CEL-0001
Summarization of Contents
Introduction
Product Types and Part Ordering Codes
Lists SmartCom and Premier Elite product types and their corresponding part codes.
Requirements for Texecom Monitor
Firmware Versions
Specifies the minimum required firmware versions for Premier Elite and SmartCom for Texecom Monitor.
Technical Information on Service Provision
Explains the technical aspects of the service, including security measures and data handling.
Availability Monitoring
Describes how the availability of the Texecom Monitor service is monitored and calculated.
Certified Configurations
Outlines the configurations that have been independently tested and certified for the service.
Compliant Configurations
Lists the configurations designed and tested by Texecom to be compliant with relevant standards.
BS9263:2016 Preventative Maintenance Visits
Details the required frequency of preventative maintenance visits based on system grading.
Specifications
SmartCom – CELA1000 Specifications
Provides detailed technical specifications for the SmartCom CELA1000 communicator.
SmartCom 4G CELA0050 Specifications
Provides detailed technical specifications for the SmartCom 4G CELA0050 communicator.
Weights & Dimensions
Shows the physical dimensions and approximate weight of the SmartCom device.
Warranty Information
Outlines the warranty period and terms for the Premier Elite SmartCom.
Supplier Information
Provides the supplier's address and contact information.
Declaration of Conformity
States the compliance of the equipment with WEEE Directive and relevant radio regulations.
Installation Guide
Texecom Monitor Overview
Provides a high-level overview of the Texecom Monitor service and its benefits.
Getting Started with Texecom Monitor
Outlines the initial steps required to set up and connect to the Texecom Monitor service.
Creating Your First Site Application
Explains the step-by-step process for creating a new site application within the Texecom Cloud.
Installing Your Panel and SmartCom
Describes the process of physically installing the alarm panel and the SmartCom communicator.
Connecting Your System to Texecom Monitor
Details how to connect the installed panel and SmartCom to the Texecom Monitor cloud service.
Connection Contracts and Payments
Explains the service connection contracts, charges, and payment responsibilities.
Getting started.
Connect to an ARC
Guides users on how to link their Texecom Cloud account with a chosen Alarm Receiving Centre (ARC).
Adding a Site to Texecom Monitor
Describes the process of adding a new site to the Texecom Monitor system via the Cloud.
Select the Service and Contract
Details how to select the appropriate services and contract terms for a new site.
Installing and configuring your panel for Texecom Monitor..
SmartCom and SmartCom 4G Opening & Identification
Covers the initial unpacking and identification of SmartCom and SmartCom 4G units.
SmartCom Connecting to the Panel
Explains how to physically connect the SmartCom communicator to the Premier Elite control panel.
SmartCom Managed Networks
Provides guidance on configuring SmartCom for managed or restricted network environments.
Connecting the SmartCom to Ethernet / LAN
Details the steps for connecting the SmartCom communicator to a local Ethernet or LAN network.
Connecting to 4G Mobile Networks
Explains how to connect the SmartCom 4G communicator using mobile networks.
Configuring Your Premier Elite System
Guides through the process of configuring the Premier Elite system for Texecom Monitor.
Connecting the System to the Texecom Monitor Service
Details how to link the configured system to the Texecom Monitor cloud service.
Testing Your Alarm Signalling to the ARC
Explains the procedure for testing alarm signalling to ensure correct communication with the ARC.
Appendices
Panel Configuration – Without Monitor Mode
Describes panel configuration steps when Texecom Monitor mode is not enabled.
Com Port Setup and UDL Password
Explains how to set up communication ports and program the UDL password on the panel.
Configure Panel for ARC Protocol
Details how to configure the panel's protocol settings for a specific ARC.
Generate an App Code
Guides on how to generate an app code for connecting the system to the Texecom Connect app.
SmartCom Default to Factory Settings
Provides instructions on how to reset the SmartCom device to its factory default settings.
Need help?
Do you have a question about the CEL-0001 and is the answer not in the manual?
Questions and answers