Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Gemmy PLC-024
Summarization of Contents
Safety Information
Classification
This Centrifuge is classified as “Class I” equipment.
CE Marking
Manufacturer declares conformity with actual required safety standards.
Standards
Equipment complies with EC Electromagnetic Compatibility requirement of EN60601-1-2 and other regulations.
Products Briefing
Overview of the centrifuge models and their key features and differences.
Specifications
Rotors Available
Lists available rotors with their capacity, code, maximum speed, and RCF.
Important Safety Warnings
Biohazard Precautions
Centrifuge is for in-vitro diagnostic use; wear gloves and goggles for biohazards.
Model PLC-024 Warning
Heavy, Risk of Injury warning specific to the PLC-024 model.
General Cautions
Warning that equipment use not specified by manufacturer may impair protection.
Intended Use
Laboratory Test Applications
For laboratory tests in biochemistry, microbic immunity, genetics, and general clinic tests like hematocrit.
Installation Procedure
Unpacking and Setup
Steps for unpacking and preparing the centrifuge for use, including checking accessories.
Centrifuge Definitions
Micro Centrifuge Definition
Definition for micro centrifuges used with up to 2.2ml micro-tubes for DNA precipitations.
Micro Haematocrit Centrifuge
Definition for micro haematocrit centrifuges used for HCT tests with capillary tubes.
Universal Centrifuge Definition
Definition for universal centrifuges accommodating various rotor types.
g Force and RCF Explained
Explanation of g Force and the formula for Relative Centrifugal Force (RCF).
Rotor and Tube Type Guide
Details on rotor types (Swing-out, Fixed-Angle) and tube types (Round, Conical) and their applications.
Operation
Critical Operation Warning
Crucial safety warning: Do not open the lid until the rotor has completely stopped.
Hematocrit (HCT) Reading Scale Guide
HCT Scale Reading Notes
Notes on using clay for capillary tubes and referring to medical personnel for scale reading.
Rotor Replacement Procedure
Rotor Change Caution
Caution: Rotor changes are limited to qualified engineers only.
Speed Indicator Calibration
Calibration Safety Warning
Warning about personal injury risk during high-speed calibration and recommending two engineers.
Calibration Operational Notes
Notes on AC motor speed, environmental factors, using a tachometer, and safety during operation.
Disassembly Procedure
Disassembly Safety Warning
Strict warning: Disassembly is limited to qualified personnel or licensed engineers.
Maintenance and Servicing
Carbon Brush Servicing
Information on carbon brushes, their limitations, and the importance of using supplier-origin parts.
Safety Device Inspection
Inspect the micro-switch for the automatic shutout safety device's function.
Fuse Protection Details
Details about the 10A fuse for protecting electronic parts and motor from voltage abuse.
Troubleshooting Guide
Troubleshooting Notes
Notes on drive motor lubrication, disassembly supervision, and electrical shock precautions.
Storage Instructions
Operating and Storage Environment
Specifies temperature, humidity, altitude, and atmospheric pressure requirements for operation and storage.
Heavy Equipment Handling Warning
Warning about the risk of personal injury when lifting and carrying heavy equipment like the PLC-024.
Component Diagram: PLC-012 Series
PLC-012 Series Component Identification
Diagram and list of components for the PLC-012 series centrifuges.
Wiring Diagram: PLC-012
PLC-012 Electrical Schematic
Electrical wiring diagram for the PLC-012 model centrifuge.
Wiring Diagram: PLC-012E/PLC-012H
PLC-012E/PLC-012H Electrical Schematic
Electrical wiring diagram for the PLC-012E and PLC-012H models.
Component Diagram: PLC-024
PLC-024 Component Identification
Diagram and list of components for the PLC-024 centrifuge.
Wiring Diagram: PLC-024
PLC-024 Electrical Schematic
Electrical wiring diagram for the PLC-024 model centrifuge.
One Year Limited Warranty
Purchase Record Details
Section for recording purchase details of the centrifuge.
Manufacturer and Representative Contact
Contact details for the manufacturer (Gemmy Industrial Corp.) and EU Representative.
Need help?
Do you have a question about the PLC-024 and is the answer not in the manual?
Questions and answers