Download Print this page

MGM 25063-3 Operating Manual

Low voltage (63v) + medium voltage (120v)

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
Table of Content
Warning
First Steps
Basic Recommendations
Technical Data (Valid for 25°C Environment Temperature)
Switching DC/DC Converter
Accessories and Options, Available Combination of HBC Controllers
Available Versions of HBC-Series TMM XXXXX-3 V7 Controllers and Basic Dimension
Basic Description of the Controllers
Summary of Possible Inputs / Outputs
Basic Controller Connection
Emergency Disconnection Circuit / Posibility of Automatic Traction Connecting
Connecting Controller to the Traction Supply and Turning on
Control Signals Specification
Control by Data Transfer / Data Communication
Control and Additional Control by Logic Signals
Control Signal - Correct Limits and Emergency Conditions
Reverse Data Transfer from the Controller, Telemetry
External Display Connecting
Sensor Motors and Controllers
Automatic Sensor Setting Procedure
Optimal and Allowed Motor Sensor Position
Basic Operating Modes - Mode Choice and Basic Type of Behavior
Memory Select
Programmable Parameters
Description of All Parameters
Parameters Setting / Data Reading from Controller
Locks of Parameters
Internal Black Box (Flying Recorder) - Data Logger
Monitoring (Display Data in Real Time)
Throttle Limits Settings (Range of Joystick, Range of Control Signals)
Start with Automatic Throttle Limits
Start with Programmed Throttle Limits
Maximal Revolution of the Output Shaft Settings
Maximal Revolution of the Motor Settings
Update SW Inside the Controller (Firmware)
Installation and Run Program Controller 2
Update of Program Controller 2
Controller States Indication, Error Messages (Firmware 3.8X and Higher)
Sparking Prevent When Connect Higher Voltage
Additional Information
Some of Protective and Safety Mechanisms of TMM ® Controllers
Accessories
Content of Delivery
Product Warranty
Service and Technical Support

Quick Links

Download this manual

18063-3 / 25063-3 / 100120-3 / 140120-3

Programmable brushless controllers for industry using

Development, manufacture,

MGM

Sv. Čecha 593, 760 01 Zlín, Czech Republic

HBC - SERIES V7

Low Voltage (63V) + Medium Voltage (120V)

Operating Manual – firmware version 3.8 or higher

, Ing. G. Dvorský

COMPRO

service:

HBC-series - page 1 / 72

Tel.: +420 577 001 350

E-mail: mgm@mgm-compro.cz

Info: www.mgm-compro.com

Table of Contents

Need help?

Do you have a question about the 25063-3 and is the answer not in the manual?

MGM 25063-3 Operating Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MGM 25063-3

Table of Contents