Related Manuals for Tektronix RSA500 Series
Summarization of Contents
Introduction to Tektronix RSA USB Spectrum Analyzers
Check list for the demo
Lists necessary hardware and software for the self-guided demo.
Demo guide overview
Summarizes the types of RF signal analysis covered in the guided demos.
Setup
Instructions for installing SignalVu-PC and connecting the RSA analyzer.
Detailed Demonstration Procedures
Demo 1: FM listening
Demonstrates demodulating and listening to local FM radio signals using the RSA.
Demo 2: ISM band DPX
Explores RF interference in the 2.4 GHz ISM band using DPX spectrum analysis.
Demo 3: EMI spurious
Shows RSA for EMI pre-compliance testing and diagnostics via spurious signal detection.
Demo 4: Basic spectrum measurements with markers
Covers fundamental spectrum analysis with markers for signal identification.
Demo 5: Power measurements with markers
Guides on measuring signal power (integrated, density) using markers.
Demo 6: Traces and detectors
Explains trace detection methods and display controls in SignalVu-PC.
Demo 7: Save and recall
Instructions on saving measurement data and configurations for later use.
Demo 8: DPX and transient capture
Illustrates capturing and analyzing transient signals using DPX spectrum display.
Demo 9: Transient capture - Mask test and act on violation
Demonstrates setting mask tests and configuring automatic actions for signal violations.
Demo 10: Analog modulation analysis
Shows how to perform analog modulation analysis, specifically for FM signals.
Demo 11: Digital modulation analysis
Covers digital modulation analysis, including QPSK demodulation and quality metrics.
Demo 12: Transmission gain measurement
Explains performing transmission gain measurements using the RSA's tracking generator.
Need help?
Do you have a question about the RSA500 Series and is the answer not in the manual?
Questions and answers