Advertisement
ControlHoist 2.0
STANDARD
INSTALLATION INSTRUCTIONS
Jackshaft with Chain Hoist
Special Application Jackshaft
-NOT FOR RESIDENTIAL USE-
-FOR INDOOR USE ONLY-
PLEASE READ THESE INSTRUCTIONS BEFORE STARTING INSTALLATION. IT IS
IMPORTANT THAT THIS OPERATOR BE INSTALLED CORRECTLY IN ORDER TO
ACHIEVE SAFE AND PROPER OPERATION.
THIS OPERATOR HAS BEEN SUPPLIED FROM THE FACTORY WITH CONSTANT
PRESSURE TO OPEN AND CLOSE. IF OTHER WIRING TYPES ARE REQUIRED,
A PHOTO ELECTRIC CONTROL MODEL OSE-S5000 BY VITECTOR FRABA, MODEL
HAE00056 BY LINEAR CORP, OR MILLER ELECTRIC REVERSING EDGE MODEL
ME WITH BLUE COLOR BAND IS REQUIRED.
SAVE THESE INSTRUCTIONS
INSTALLER: ATTACH THIS BOOKLET TO WALL
RAYNOR GARAGE DOORS DIXON , ILLINOIS 61021
AND
USER GUIDE
Model CSJ & CSH
Industrial Duty
BELT DRIVE
Jackshaft
IMPORTANT:
NEXT TO PUSH BUTTON.
Rev. 06/21
5973130-1
Advertisement
Table of Contents
Related Manuals for Raynor CSH
Summarization of Contents
Specifications
Headroom Requirement
Specifies required vertical clearance above the door shaft for operator mounting.
Side Room Requirement
Defines the necessary side clearance from the jamb for operator installation.
Door Type
Details compatible door types for the operator, including sectional and rolling doors.
Reduction
Describes the drive mechanism, featuring V-belt and chain reduction.
Important Installation Instructions
General Safety Guidelines
Critical safety and procedural guidelines that must be followed during installation.
Preliminary Inspection
Packaging Check
Guidance on checking the shipping container for damage upon arrival.
Visual Inspection
Instructions for inspecting all operator parts for any shipping damage.
Installation Steps
Unpacking and Preparation
Procedure for carefully unpacking the operator and its components from the carton.
Mounting Position Selection
Details on selecting the correct mounting position for the operator based on factory order.
Mounting Pad and Operator Hanging
Instructions for installing the mounting pad and hanging the operator onto the shaft.
Disconnect Bracket Installation
Instructions for installing the bracket to manage the operator's disconnect mechanism.
Wiring and Connections
Guidance on connecting the control station, entrapment devices, and power supply.
Logic Board Functions and Programming
Logic Board Overview
Diagram and description of the logic board's components and terminal connections.
Logic Board Programming
Step-by-step instructions for programming the logic board for various functions.
Special Programming Instructions
Procedures for adjusting maximum run timer and reversing motor direction.
User and Safety Instructions
Operating the Control Station
How to use the standard open, stop, and close buttons for door operation.
Verifying Limit Switch Adjustment
Steps to check if the door's limit switches are set correctly for proper operation.
Testing Entrapment Protection
Procedure for testing safety features like photo eyes and reversing edges.
Periodic Inspection and Maintenance
Lubrication Requirements
Information regarding the lubrication needs of the operator unit.
Routine Inspection and Adjustments
Guidelines for checking bolts, belts, clutch, limits, and labels periodically.
Operator Status and Display Messages
On Board Status Lights
Definitions and meanings of the various status lights on the logic board.
LCD Display Messages
Explanations for messages displayed on the operator's LCD screen.
Logic Board Care and Accessories
Common Mistakes
Warnings about common installation errors that can damage the logic board.
Hooking Up Accessories
Guidelines for connecting external devices to the logic board's power terminals.
Auxiliary Board Connection
Instructions for connecting an optional auxiliary board to the main logic board.
Need help?
Do you have a question about the CSH and is the answer not in the manual?
Questions and answers