Advertisement
PRODUCT OVERVIEW
The 858 IR Receiver receives IR signals from a handheld IR remote control
and relays this to the audio/video equipment for operation from another
room. Mounts to a single gang J-Box using a Decora
FEATURES
®
• Stylish Decora
design. Available in white or almond colors
• Dual color LED. Green for system status and blue for talk back.
• Ultra thin design. Mounts easily in any J-box or P-ring.
• Wide band IR. Receives IR from many types of remotes.
INSTALLATION
Connect the 858 to the 857 (or equivalent) connecting block using 2 twisted
pair wire. Use one pair to connect GND (GROUND) and IR (SIGNAL). Use the
other pair to connect ST (STATUS) and V+ (+12VDC). If the wire has a shield,
connect it to the ground at both ends. See Figure 1 for detail of these
connections.
Figure 1
CONNECT TO
846C POWER
SUPPLY
SHIELD WIRED
TO GROUND
ST
IR
GND V+
2-TWISTED
PAIR WIRE
STATUS INDICATOR
To use the status indicator on the 858 connect the 12 Volt 100mA or higher
power supply to the STATUS line of the 857 connecting block as shown in
Figure 2. Plug the power supply into the switched outlet on the stereo
receiver. When the receiver is on, the power supply will turn on the system
status line and illuminate the LED Green of the 858.
Figure 2
12 VDC
S
TATUS
+12VDC
P
OWER
+12VDC
IR R
I
ECEIVER
N
IR C
I
OMMON
N
+
12VDC
GND
STATUS
SIGNAL
DESIGNED IN USA MADE IN KOREA
CONNECTING
®
cover plate.
12 VDC
S
TATUS
+12VDC
P
OWER
+12VDC
IR R
I
ECEIVER
N
IR C
I
OMMON
N
+
12VDC
GND
STATUS
SIGNAL
DESIGNED IN USA MADE IN KOREA
CONNECTING
BLOCK
857
BLOCK
The status line can be turned on or off by setting the jumper on back of the
858 as shown in Figure 3.
Figure 3
ST
IR
MOUNTING
Mount the 858 to the J-Box using the screws that are supplied. Mount the
cover plate (not included) to the IR receiver. See Figure 4.
857
SPECIFICATIONS
Receive Frequency: 36kHz to 58kHz
Transmit Frequency: 40kHz and 56kHz
Status Power: 12VDC 3mA max.
Wire requirements: 2 twisted pair, with or without shield
Dimensions: 1
STATUS ON
GND V+
ST
Range: On Axis – 55ft to 80ft
30º Off Axis – 30ft to 55ft
Power: 12VDC 31mA max.
3
/
"W x 4
5
/
"H x
3
/
"D
4
16
8
Weight: 1/2oz
STATUS OFF
IR
GND V+
Figure 4
Advertisement
