Related Manuals for Lenze E84AVTCE1834
Summarization of Contents
Mounting Instructions Overview
Product Identification
Identifies the L-force Drives 8400 series frequency inverter and key model information.
Critical Safety Warnings
Dangerous Voltage Protection
Details hazards from residual voltage and required safety procedures before working on the device.
Inverter Component Layout (3-15 kW)
External Connections Diagram
Visual representation of inverter modules and connection terminal locations for 3-15 kW models.
Inverter Component Layout (18.5-22 kW)
External Connections Diagram
Visual representation of inverter modules and connection terminal locations for 18.5-22 kW models.
X80 Terminal Wiring and Installation
Installation Steps and Signal Assignments
Guides through the installation process and wiring for the X80 terminal, including its function.
Inverter Mechanical Dimensions
Dimensional Specifications Table
Provides detailed physical dimensions (h, b, t, h1, h2, t1, t2, g1, g2, g3) for various inverter models.
Inverter Mounting and Weight Data
Mounting Hole and Weight Details
Lists specifications for mounting holes (d, c, i) and the weight of different inverter models.
Power Input Terminal X100
TN/TT and IT System Wiring Guidance
Explains power input wiring for TN/TT and IT systems, specifying conductor types and sizes.
Auxiliary Terminal X101
COM, NC, NO Contact Wiring
Details how to wire the common (COM), normally closed (NC), and normally open (NO) contacts of terminal X101.
Motor and Temperature Sensor Terminals
X105 and X106 Wiring Specifications
Covers wiring for motor phases (U, V, W), PE, and temperature sensors (T1, T2) at terminals X105 and X106.
Motor and Sensor Wiring Diagrams
X105/X106 System Connections
Illustrates wiring diagrams for motor connections and PTC sensors, including system types.
X80 Terminal Wiring
Installation and Signal Connections
Provides instructions for installing and wiring the X80 terminal, showing signal assignments.
Signal Terminal Wire Preparation
Wire Stripping and Gauge for Signal Terminals
Details required wire stripping length and conductor cross-section for signal terminals X1, X3, X4, X5, X10, X107.
Communication and Analog Signal Wiring
X1 CAN Bus and X3 Analog Wiring
Explains wiring for the CAN bus interface (X1) and analog signal inputs/outputs (X3).
Digital Input/Output Wiring
X4 Digital Outputs & X5 Digital Inputs
Illustrates the wiring for digital output terminals (X4) and digital input terminals (X5).
Encoder and Serial Interface Wiring
X7 Encoder & X8 Serial Communication
Details wiring connections for encoder/resolver (X7) and serial interfaces like TTL, Hiperface, SSI (X8).
Communication and Control Wiring
X10 CAN Bus & X107 Control Signals
Provides wiring diagrams for the CAN bus interface (X10) and control signal terminal (X107).
Company Contact and Certifications
Lenze Service Information
Lists contact details for Lenze Drives GmbH and Lenze Service GmbH, along with product certifications.
Need help?
Do you have a question about the E84AVTCE1834 and is the answer not in the manual?
Questions and answers