Table of Contents
Related Manuals for Adastra UA90
Summarization of Contents
Introduction and Safety
Safety Precautions
Important safety warnings, symbols, and notices for correct operation.
Installation and Panel Overview
Mounting Options
Details rack mounting and wall/under counter mounting methods.
Front and Rear Panel Identification
Overview of front panel controls and rear panel connections.
Connection and Setup
Alarm Contacts
Details the 24V alarm terminal connection for muting channels.
CH.1 Input Configuration
Covers XLR/jack and screw terminal inputs, including DIP switch settings.
CH.2 and CH.3 Inputs
Describes microphone/line inputs via jack and screw terminals.
CH.4 and CH.5 Inputs
Details line level RCA inputs and 3.5mm stereo AUX input.
Line Output
Explains the twin RCA line output for connecting to other amplifiers.
Speaker Connections
100V Line Systems
Guidance on connecting multiple speakers in parallel for 100V systems.
Low Impedance Systems
Instructions for connecting a single 8Ω speaker.
Operation
System Testing
Steps for turning on the unit and testing inputs and volume levels.
Feedback Prevention
Advice on positioning microphones to avoid feedback.
Troubleshooting
No Power or Output Issues
Troubleshooting steps for power, LEDs, and no audio output.
Audio Quality Problems
Resolving issues with loud, distorted, or low-level audio output.
Feedback and Overheating
Solutions for microphone feedback and amplifier overheating.
Need help?
Do you have a question about the UA90 and is the answer not in the manual?
Questions and answers