Chapter 2: Hardware Setup; Chassis Cover; Removing The Front Bezel - Asus RS260-E3 RS8 Service Manual

2.1

Chassis cover

The chassis features a "screwless design" that allows convenient assembly
and disassembly.
• Remove the front bezel to access the hot-swap HDDs, optical drive,
and floppy drive.
• Remove the chassis cover to access the internal components or if you
want to install system devices.
2.1.1 2.1.1 2.1.1

Removing the front bezel

Removing the front bezel Removing the front bezel
2.1.1 2.1.1 Removing the front bezel Removing the front bezel
To remove the front bezel:
1. Hold the sides of the front bezel,
then slightly press the middle part
to disengage it from the front
panel.
2. Pull the bezel from the front panel.
2 - 2 2 - 2 2 - 2 2 - 2 2 - 2
P r e s s h e r e t o r e l e a s e P r e s s h e r e t o r e l e a s e P r e s s h e r e t o r e l e a s e
P r e s s h e r e t o r e l e a s e P r e s s h e r e t o r e l e a s e
C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p