Table of Contents
Advertisement
Scroll down to display more items:
Advanced
SYSTEM1 Target Temperature
SYSTEM2 Target Temperature
FBD_FAN1 Speed
VCORE0 Voltage
VCORE1 Voltage
VTT
+1.5V
+1.8V
+3V
+12V
+5V
+5VSB
VBAT
F1
Help
ESC
Exit
CPU1/2 Domain 0/1 Temperature (CPU1/2 Target Temperature),
SYSTEM1/2 Temperature, CPU_FAN1/2 Speed, FRN_FAN1/2/3/4
Speed, REAR_FAN1/2 Speed
These fields show the auto-detected values and are not user-configurable. If no
CPU or fan is installed, the field shows N/A.
Smart Fan Control [Smart Fan II]
Allows you to disable or configure the Smart Fan feature.
Configuration options: [Disabled] [Smart Fan] [Smart Fan II]
CPU1/2 Domain 0/1 Target Temperature
(CPU1/2 Target Temperature)
Allows you to set the target CPU temperature at which the CPU fan will start
running if the fan is not yet turned on. Configuration options: [54 ºC]~[76 ºC]
SYSTEM1/2 Target Temperature
Allows you to set the target sytem temperature at which the system fan will start
running if the fan is not yet turned on.
Configuration options: [49 ºC]~[70 ºC]
FBD_FAN1 Speed, VCORE0/1 Voltage, VTT, +1.5V, +1.8V, +3V, +12V,
+5V, +5VSB, VBAT
These fields show the auto-detected values and are not user-configurable.
5-30
PhoenixBIOS Setup Utility
Hardware Monitor
Select Item
↑↓
Select Menu
→←
[60
C]
o
[ 6 0
C ]
o
N/A
N/A
1.25 V
1.21 V
1.56 V
1.79 V
3.28 V
11.91 V
4.87 V
4.96 V
3.10 V
-/+
Change Values
Enter
Select
Sub-Menu
Item Specific Help
Full fan speed will
be started when the
temperature reaches the
selected target value.
F9
Setup Defaults
F10
Save and Exit
Chapter 5: BIOS setup
Advertisement
Table of Contents
