Table of Contents
Advertisement
5.4.3
PCI Configuration
This menu shows the PCI configuration settings. Select an item then press <Enter>
to display the configuration options.
Advanced
Reset Configuration Data:
Plug & Play OS
Palette Snooping
PCIEX1 Slot
PCIEX2 Slot
PCI3 Slot
PCIE4 Slot
PCIE5 Slot
F1
Help
ESC
Exit
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data (ESCD)
area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
PCIX1-2 Slot; PCI3 Slot; PCIE4-5 Slot
Allows you to configure the specific PCI devices.
Advanced
Option ROM Scan:
Option ROM Scan [Enabled]
Allows you to enable or disable the device expansion ROM.
Configuration options: [Enabled] [Disabled]
5-22
PhoenixBIOS Setup Utility
PCI Configuration
Select Item
↑↓
Select Menu
→←
PhoenixBIOS Setup Utility
PCIX1 Slot
[Enabled]
[No]
[No]
[Disabled]
-/+
Change Values
Enter
Select
Sub-Menu
Item Specific Help
Select 'Yes' if you
want to clear the
Extended System
Configuration
Data (ESCD) area.
F9
Setup Defaults
F10
Save and Exit
Item Specific Help
Initialize device
expansion ROM
Chapter 5: BIOS setup
Advertisement
Table of Contents
