Table of Contents
Advertisement
Quick Links
Operation, Parts
Cordless Electric Airless
Sprayers
For portable airless spraying of architectural paints and coatings (390 PC). For the
application of line striping materials (ES 500 Stencil). Not approved for use in
explosive atmospheres or hazardous (classified) locations. For professional use only.
390 PC Cordless Models: 25T804, 826280, 25T863, 25T943, 25T882, 25T805
ES 500 Stencil Models: 25U513, 25U514
3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and related
manuals before using the equipment. Be familiar with the controls
and the proper usage of the equipment. Save these instructions.
Related Manuals
Manual
Description
311861
Gun (Contractor/FTX)
334599
Pump
3A6285
Gun (Contractor PC)
311254
Silver/Flex Plus
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
3A8179C
EN
Advertisement
Table of Contents
Related Manuals for Graco 25T805
Summarization of Contents
Warnings
FIRE AND EXPLOSION HAZARD (GROUNDING)
Hazards related to static electricity and flammable materials.
FIRE AND EXPLOSION HAZARD
Hazards related to flammable fumes in the work area.
Warnings
SKIN INJECTION HAZARD
Risk of serious injury from high-pressure fluid injection.
EQUIPMENT MISUSE HAZARD
Risks associated with improper equipment operation or maintenance.
Warnings
PRESSURIZED ALUMINUM PARTS HAZARD
Hazards from incompatible fluids reacting with aluminum parts.
BATTERY AND CHARGER COMPATIBILITY HAZARD
Risks of using incorrect DEWALT batteries or chargers.
TOXIC FLUID OR FUMES HAZARD
Dangers from toxic fluids or fumes causing injury or death.
MOVING PARTS HAZARD
Risks from pinch, cut, or amputation by moving parts.
PERSONAL PROTECTIVE EQUIPMENT
Essential protective gear for safe operation.
Component Identification
Stand Models
Identification of components for stand models.
Component Identification
Hi-Boy
Identification of components for Hi-Boy models.
Grounding Instructions
Pails
Specific grounding procedures for pails with solvents.
Pressure Relief Procedure
Trigger Lock
How to engage and use the trigger lock for safety.
Setup
Battery Installation and Removal
Steps for installing and removing the battery pack.
Operation
Spray Tip Installation
How to install spray tips correctly.
Operation
Clear Tip Clog
Procedure to clear a clogged spray tip.
Operation
Cleaning Fluid Compatibility
Information on compatible cleaning fluids for the system.
Troubleshooting
Mechanical/Fluid Flow
Troubleshooting issues related to pump output and fluid delivery.
Troubleshooting
Electrical
Troubleshooting electrical faults and system behavior.
Parts
390 and ES 500 Stencil Stand Sprayer Parts
Parts list for stand models.
Parts
390 Hi-Boy Sprayers Parts
Parts list for Hi-Boy models.
Parts
Control Box and Filter
Parts list for control box and filter components.
Parts
Control and Filter Parts List
Parts list for control and filter components.
Need help?
Do you have a question about the 25T805 and is the answer not in the manual?
Questions and answers