Download Print this page
JVC GR-SXM200AS Instructions Manual
JVC GR-SXM200AS Instructions Manual

JVC GR-SXM200AS Instructions Manual

Compact vhs camcorder

Advertisement

Quick Links

INSTRUCTIONS
COMPACT VHS CAMCORDER
GR-SXM600
GR-SXM300
GR-SXM255
GR-SXM200
GR-SX260
GR-SX160
®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.
COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
"PRECAUTIONS" (
Automatic Demonstration takes place when "DEMO MODE" is set to "ON"
(factory-preset).
• Available when the Power Switch
on the switch.
• Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
• "DEMO MODE" remains "ON" even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch
while the demo is in progress. This takes you directly to the demo mode's Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
NOTES:
• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
AG
AG/AS
pg. 3, 4) to ensure safe use of this product.
AUTOMATIC DEMONSTRATION
@
is set to "
ENGLISH
AS
AG/AS/AA
AS
AG/AS
" or "
" while pressing down the Lock Button
@
to "
1
Printed in Malaysia
AG/AS/AA
1003-AS-YL-PJ
" and press the MENU Wheel
1
to select "OFF" and press it.
LYT1202-001B
VHS
PAL
625
!
located
1
in

Advertisement

loading
Need help?

Need help?

Do you have a question about the GR-SXM200AS and is the answer not in the manual?

Questions and answers

Summarization of Contents

Precautions
Safety Precautions
General safety guidelines and warnings for operating the camcorder and its accessories.
Getting Started
Using the Battery Pack
Instructions for using and charging the camcorder's battery pack.
Using AC Power
Connecting and using the camcorder with the AC adapter.
Battery Refresh Procedure
Procedure to fully discharge and recharge the battery pack for optimal performance.
Basic Features
Snapshot Recording
Recording still images onto tape, similar to photographs.
5-Second Recording
Recording short 5-second clips for quick scene transitions.
Backlight Compensation
Adjusting brightness to improve subject visibility against a bright background.
Auto/Manual Focus Control
Switching between automatic and manual focus control for sharp images.
Controls, Connectors and Indicators
LCD Monitor/Viewfinder Indications
Explanation of indicators shown on the LCD monitor and viewfinder during recording and playback.
Menu Settings
Camera Menu
Access to camera-specific settings.
System Menu
Access to system-wide settings.
Advanced Features
Night-Scope
Enhancing visibility in dark conditions.
Fade/Wipe Effects
Adding transitions to recordings.
Programme AE With Special Effects
Automatic exposure modes with effects.
Digital Effects
Applying creative visual effects.