Advertisement
Quick Links
WSG 8-115 (A)/(B); WSG 8-125 (A)/(B); WSG 11-125 (A)/(B); WSG 11-150 (A)/(B); WSG 12-
125P (A)/(B); WSG 17-125P; WSG 17-125PS; WSG 17-150P; WSG 17-70Inox
Repair instructions
C-SC_CSSM
Version 1.1
2017-03-03
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page 1 of 53
Advertisement
Related Manuals for Fein WSG 15-125P A
Summarization of Contents
Disassembly
Disassembling housing cover
Steps to remove the outer casing of the tool.
Speedy mains cable replacement
Procedure for safely replacing the power supply cable.
Disassembling switch (applies to: WSG 8; WSG 11)
Steps to remove the power switch for WSG 8 and WSG 11 models.
Disassembling switch (applies to: WSG 8-115; WSG 11)
Steps to remove the power switch for WSG 8-115 and WSG 11 models.
Disassembling switch (applies to: WSG 12; WSG 17)
Steps to remove the power switch for WSG 12 and WSG 17 models.
Disassembling stator
Detailed steps for removing the stator from the motor assembly.
Disassembling armature
Procedure for dismantling the armature, including bearings and pinion.
Removing the gearbox housing
Instructions for detaching the gearbox housing from the motor unit.
Disassembling gearbox housing
Steps to take apart the gearbox housing components.
Assembly
Assembling gearbox housing
Steps to reassemble the gearbox housing and its components.
Assembling armature
Procedure for reassembling the armature with bearings, plate, and magnet.
Assembling the stator
Steps to reassemble the stator into the motor housing correctly.
Assembling gearbox head
Instructions for assembling the gearbox head onto the motor unit.
Fitting the gearbox housing
Procedure for fitting the gearbox housing components, including screws and levers.
Assembling switch and electronics
Steps for reassembling the switch and associated electronics onto the motor housing.
Assembling switch and electronics (applies to: WSG 8-115; WSG 8-125; WSG 11-125)
Specific switch/electronics assembly for WSG 8-115, 8-125, and 11-125 models.
Assembling switch and electronics (applies to: WSG 8; WSG 11)
Switch and electronics assembly for WSG 8 and WSG 11 variants.
Assembling switch and electronics (applies to: WSG 12; WSG 17)
Switch and electronics assembly for WSG 12 and WSG 17 models.
Fitting the housing cover
Steps to attach the lower part of the housing cover using screws.
Setting gearbox clearance
Procedure for checking and adjusting the gearbox clearance after assembly.
Need help?
Do you have a question about the WSG 15-125P A and is the answer not in the manual?
Questions and answers