Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hantek HDG6082B
Summarization of Contents
Safety Requirements
General Safety Summary
Precautions to avoid injury and product damage during operation and maintenance.
Safety Terms and Symbols
Explains danger, warning, notice terms and product symbols for safety.
Product Scrapping
Guidance on proper device recycling and environmental considerations.
Brief Introduction
Overview of HDG6000B(C) Series
Overview of HDG6000B(C) series, its capabilities, and features.
Chapter 1 Quick Start
General Inspection
Steps to check shipping container, accessories, and instrument condition upon receipt.
Front Panel Overview
Description and introduction to the front panel controls and connectors of the HDG6000B(C).
Rear Panel
Details of the connectors and ports located on the rear panel of the instrument.
Prepare Instrument for Use
Instructions for adjusting supporting legs and connecting the power cord for instrument operation.
User Interface Navigation
Explanation of the instrument's user interface regions: status, menu, and window areas.
Parameter Setting Methods
Methods for setting parameters using the numeric keyboard, direction keys, and knob.
Accessing Help
Instructions on how to access context-sensitive help information using the Help key.
Chapter 2 Basic Waveform Output
Channel Selection
Procedure for selecting a single or dual channel for waveform output configuration.
Waveform Parameter Configuration
Steps to configure waveform parameters like frequency, amplitude, and offset.
Basic Waveform Output Example
A practical example demonstrating how to configure the generator for basic waveform output.
Chapter 3 Arbitrary Waveform Output
Enabling Arbitrary Waveform Function
Steps to enable the arbitrary waveform function and access its settings.
Selecting Arbitrary Waveforms
Guide on selecting built-in or user-defined arbitrary waveforms from internal/external memory.
Chapter 4 Harmonic Output
Harmonic Output Overview
Explanation of harmonic output, Fourier transform, and fundamental/harmonic components.
Fundamental Waveform Setup
Setting parameters like frequency, amplitude, and phase for the fundamental waveform.
Harmonic Order Configuration
Specifying the highest order of harmonic to be output, up to the 16th order.
Harmonic Type Selection
Choosing between Even, Odd, or All harmonic types for output.
Harmonic Amplitude Settings
Setting the amplitude for each specified harmonic order.
Harmonic Phase Settings
Adjusting the phase for each specified harmonic order.
Chapter 5 Modulated Waveform
AM Modulation Configuration
Configuration for Amplitude Modulation (AM), including carrier and modulating parameters.
DSB-AM Modulation Setup
Settings for Double Sideband Amplitude Modulation (DSB-AM).
FM Modulation Settings
Configuration for Frequency Modulation (FM), including carrier and deviation settings.
PM Modulation Settings
Settings for Phase Modulation (PM), including carrier and phase deviation.
2ASK Modulation
Configuration for Amplitude Shift Keying (2ASK) modulation.
2FSK Modulation
Settings for Frequency Shift Keying (2FSK) modulation.
2PSK Modulation
Configuration for Phase Shift Keying (2PSK) modulation.
BPSK Modulation
Settings for Binary Phase Shift Keying (BPSK) modulation.
QPSK Modulation Settings
Configuration for Quadrature Phase Shift Keying (QPSK) modulation.
3FSK Modulation Settings
Settings for Three-Frequency Shift Keying (3FSK) modulation.
4FSK Modulation Settings
Configuration for Four-Frequency Shift Keying (4FSK) modulation.
OSK Modulation Settings
Settings for Oscillation Shift Keying (OSK) modulation.
PWM Modulation Settings
Configuration for Pulse Width Modulation (PWM).
Chapter 6 Sweep
Enabling Frequency Sweep
Enabling the frequency sweep mode for the instrument.
Start and Stop Frequency Settings
Defining the start and stop frequencies for the sweep operation.
Center Frequency and Span Settings
Setting sweep boundaries using center frequency and frequency span.
Linear Sweep Configuration
Configuring the instrument for linear frequency sweep type.
Sweep Time Configuration
Setting the duration for the frequency sweep from start to stop frequency.
Return Time Configuration
Defining the time to return from stop frequency to start frequency after a sweep.
Hold Time Configuration
Setting the duration to hold at the stop frequency during a sweep.
Mark Frequency Setting
Specifying a mark frequency for synchronization or triggering during sweep.
Sweep Trigger Source Selection
Selecting the trigger source (Internal, External, Manual) for sweep operation.
Trigger Output Edge Configuration
Configuring the output edge polarity for sweep trigger signals.
Chapter 7 Burst
Enabling Burst Mode
Enabling the burst output mode for waveforms.
Burst Type Selection
Selecting the type of burst: N Cycle, Infinite Cycle, or Gated.
Burst Period Setting
Setting the period between consecutive bursts for N Cycle mode.
Burst Phase Setting
Defining the starting phase of the burst waveform.
Burst Trigger Source Selection
Selecting the trigger source (Internal, External, Manual) for burst output.
Gate Polarity Setting
Setting the polarity (Positive/Negative) for gated burst mode.
Burst Trigger Output Edge Configuration
Configuring the output edge for burst trigger signals.
Chapter 8 Counter
Enabling the Counter Function
Activating the built-in frequency counter function.
Counter Parameter Configuration
Configuring counter parameters like gate time, sensitivity, and trigger level.
Chapter 9 Digital Generator
Digital Generator Terminal Description
Description of the digital generator terminals and their pinouts.
Digital Generator Function Introduction
Overview of the digital generator functions: Sync Signal and Programmable Signal.
Chapter 10 Utility
Sync Signal Configuration
Configuration and behavior of the synchronization (Sync) signal output.
Output Impedance Settings
Setting the output impedance for channels (50Ω or HighZ).
Network Configuration
Configuration of network interfaces (LAN, WLAN, Hotspot) for remote communication.
System Settings Management
Accessing system-wide settings like language, startup configuration, sound, and display intensity.
Print and Screenshot Function
Functionality for printing screen contents or saving screenshots to a USB device.
Firmware Update Procedure
Procedure for updating the instrument's firmware.
Store and Recall Functionality
Saving and loading instrument states and waveform data.
Chapter 11 Remote Control
Installing Keysight IO Libraries Suite
Instructions for installing the necessary software for remote control.
Remote Control via USB
Connecting and controlling the instrument via USB.
Remote Control via LAN (HDG6000C)
Setting up remote control over a wired Ethernet connection.
Remote Control via WLAN (HDG6000C)
Establishing remote control over a Wi-Fi connection.
Remote Control via Hotspot (HDG6000C)
Connecting and controlling the instrument using its built-in Wi-Fi hotspot.
Appendix A Specifications
HDG6000B(C) Series Specifications
General technical specifications applicable to all HDG6000B(C) models.
Waveform Capabilities
List of standard and arbitrary waveform types supported by the instrument.
Frequency Characteristics by Model
Detailed frequency ranges for various waveform types across different models.
Resolution and Accuracy
Specifies the vertical resolution and measurement accuracy of the instrument.
Sine Wave Spectrum Purity
Harmonic distortion and phase noise characteristics for sine waves.
Appendix B Accessories
Standard Accessories List
List of standard accessories included with the instrument.
Need help?
Do you have a question about the HDG6082B and is the answer not in the manual?
Questions and answers